Pepperl+Fuchs LGS25
Light grid
We ship to United States of America!
- Automation light grid
- Optical resolution 25 mm
- Super-fast object detection, even with 3-way beam crossover
- Software-free adjustment of height monitoring
- Object identification using integrated object recognition
- IO-link interface for service and process data
- Optional temperature range to
-30 ?°C
Item Number:
LGS25
Delivery standard: 3-6 weeks, depending on the country.
Condition: new
The price and delivery terms is not final. Please check with the manager.
Contact our experts
- Overview +
- Comments +
| Light type | modulated infrared light , 850 nm |
| Connection | Emitter: 200 mm connecting cable with 4-pin, M12x1 connector Receiver: 200 mm connecting cable with 8-pin, M12 x 1 connector Cable cross section min. 0.25 mm2 Max. cable length 30 m |
| Parameterization indicator | IO link communication: green LED goes out briefly (1 Hz) |
| Housing length L | see Table 1, max. 3360 mm |
| Mode | COM 2 (38.4 kBaud) |
| Optical resolution | without beam crossover: 25 mm with beam crossover: 12.5 mm with in 25% and 75% of the range |
| Function input | Range input activation from 1.6 m (or 2 m in case of option /35) with +UB or 0 V on pin 2 (emitter) Teach-In input for programming on pin 8 (receiver) |
| Ambient temperature | Standard : -10 ... 60 ?°C (14 ... 140 ?°F) Option /146: -30 ... 60 ?°C (-22 ... 140 ?°F) |
| Test input | Emitter switch-off with +UB or 0 V at pin 4 (emitter) |
| Operating mode | Emitter: Emitter power adjustable in two ranges |
| Mass | see Table 1, max. 1750 g (per profile) |
| UL approval | cULus Listed |
| Voltage drop | 2 V DC |
| Light source | IRED |
| Angle of divergence | 10 ?° |
| Protection class | III ( IEC 61140 ) |
| Mission Time (TM) | 20 a |
| Time delay before availability | see Table 1, max. 2.3 s |
| Beam blanking | adjustable max. 2 fixed suppressible beam areas (blanking) |
| Switching current | max. 100 mA |
| Switching type | Factory setting: dark on , Switchable to light-on mode |
| Degree of protection | IP67 |
| Number of beams | see Table 1, max. 129 |
| Ripple | 10 % |
| Pre-fault indication output | Stability Control (SC) 1 PNP, short-circuit protected, reverse polarity protected on pin 2 (receiver) |
| Switching voltage | max. 30 V DC |
| Timer function | Off-delay programmable from 0 ... 1.25 s in 5 ms steps (adjustment via IO-Link only) |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Field height | see Table 1, max. 3200 mm |
| Effective detection range | Standard : 0.3 ... 6 m Option /35: 0.5 ... 8 m |
| Response time | see Table 1, max. 12 ms |
| Protocol | IO-Link V1.0 |
| MTTFd | 34 a |
| Operating voltage | 18 ... 30 V DC |
| Interface type | IO-Link |
| No-load supply current | Emitter : 50 mA Receiver: 150 mA (without outputs) |
| Ambient light limit | > 50000 Lux (if external light source is outside the opening angle) |
| Switching frequency | see Table 1, max. 135 Hz |
| Beam spacing | 25 mm |
| Housing width | 20 mm |
| Operation indicator | Power on: LED green, statically lit , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz) |
| Threshold detection range | Standard : 7.5 m Option /35: 10 m |
| Housing depth | 30.5 mm |
| Diagnostic Coverage (DC) | 60 % |
| Storage temperature | -30 ... 70 ?°C (-22 ... 158 ?°F) |
| Function indicator | Emitter: Yellow LED, illuminates at high emitting power, off at low emitting power Receiver: Yellow LED: illuminates when an object is detected flashes when falling short of the stability control (4 Hz) Error message: Yellow LED flashes (8 Hz) in emitter and receiver |
| Control elements | Receiver: 2 touch buttons for programming |
| Beam crossover | Factory setting: three beam crossing, deactivateable |
| Switching threshold | Factory setting: The signal tracking for the threshold value is deactivated, increasing the optical resolution by a maximum of 4 mm; switchable to active signal tracking |
| Signal output | Switch output (detection field C/Q) 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected on pin 4 (receiver), Height monitoring (H1, H2. H3) 3 push-pull (4 in 1) outputs, short-circuit proof, reverse polarity protected on pin 5, pin 6, pin 7 (receiver) |
Buy Pepperl+Fuchs LGS25 with the best possible price and delivery terms on eltra-trade.com
Eltra Trade company offers electrical equipment for sale. We not only hold a vast selection of stock, we also work alongside manufacturers and suppliers throughout the world in order to hunt down the best price for every enquiry. We provide shipping to any country in the world. Get high-quality products from the best automation brands at cheap prices. Responsibility for your order is always our focus. We want your business to develop, improve and flourish.
Comments
No comments yet