Pepperl+Fuchs LGS8
Light grid
We ship to United States of America!
- Automation light grid
- Optical resolution 8 mm
- Super-fast object detection, even with 3-way beam crossover
- Software-free adjustment of height monitoring
- Object identification using integrated object recognition
- IO-Link interface for service and process data
- Optional temperature range to
-30 В°C
Item Number:
LGS8
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Automation light grid with beam spacing of 8 mm, IO-Link interface, push-pull output, fixed cable with M12 plug | ||
| Effective detection range | Standard : 0.3 ... 6 m Option /35: 0.5 ... 8 m | |
| Threshold detection range | Standard : 7.5 m Option /35: 10 m | |
| Light source | IRED | |
| Light type | modulated infrared light , 850 nm | |
| Field height | see Table 1, max. 2100 mm | |
| Beam crossover | Factory setting: three beam crossing, deactivateable | |
| Beam blanking | adjustable max. 2 fixed suppressible beam areas (blanking) | |
| Beam spacing | 8.33 mm | |
| Number of beams | see Table 1, max. 253 | |
| Operating mode | Emitter: Emitter power adjustable in two ranges | |
| Optical resolution | without beam crossover: 8 mm with beam crossover: 4 mm with in 25% and 75% of the range | |
| Opening angle | 10 В° | |
| Ambient light limit | > 50000 Lux (if external light source is outside the opening angle) | |
| MTTFd | 21 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 60 % | |
| Operation indicator | Power on: LED green, statically lit , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz) | |
| Function indicator | Emitter: Yellow LED, illuminates at high emitting power, off at low emitting power Receiver: Yellow LED: illuminates when an object is detected flashes when falling short of the operating reserve (4 Hz) Error message: Yellow LED flashes (8 Hz) in emitter and receiver | |
| Control elements | Receiver: 2 touch buttons for programming | |
| Parameterization indicator | IO link communication: green LED goes out briefly (1 Hz) | |
| Operating voltage | 18 ... 30 V DC | |
| Ripple | 10 % | |
| No-load supply current | Emitter ≦: 50 mA Receiver: ≦ 150 mA (without outputs) | |
| Time delay before availability | see Table 1, max. 3.8 s | |
| Interface type | IO-Link | |
| Protocol | IO-Link V1.0 | |
| Mode | COM2 (38.4 kBit/s) | |
| Test input | Emitter switch-off with +UB or 0 V at pin 4 (emitter) | |
| Function input | Range input activation from 1.6 m (or 2 m in case of option /35) with +UB or 0 V on pin 2 (emitter) Teach-In input for programming on pin 8 (receiver) | |
| Stability alarm output | Stability Control (SC) 1 PNP, short-circuit protected, reverse polarity protected on pin 2 (receiver) | |
| Switching type | Factory setting: dark on , Switchable to light-on mode | |
| Signal output | Switching output (detection field C/Q) 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected on pin 4 (receiver), Height monitoring (H1, H2. H3) 3 push-pull (4 in 1) outputs, short-circuit proof, reverse polarity protected on pin 5, pin 6, pin 7 (receiver) | |
| Switching threshold | Factory setting: The signal tracking for the threshold value is deactivated, increasing the optical resolution by a maximum of 4 mm; switchable to active signal tracking | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 100 mA | |
| Voltage drop | ≦ 2 V DC | |
| Switching frequency | see Table 1, max. 118 Hz | |
| Response time | see Table 1, max. 20 ms | |
| Timer function | Off-delay programmable from 0 ... 1.25 s in 5 ms steps (adjustment via IO-Link only) | |
| Communication interface | IEC 61131-9 | |
| Product standard | EN 60947-5-2 | |
| Protection class | III ( IEC 61140 ) | |
| UL approval | cULus Listed | |
| CCC approval | CCC approval / marking not required for products rated ≦36 V | |
| Ambient temperature | Standard : -10 ... 60 В°C (14 ... 140 В°F) Option /146: -30 ... 60 В°C (-22 ... 140 В°F) | |
| Storage temperature | -30 ... 70 В°C (-22 ... 158 В°F) | |
| Conductor cross section | min. 0.25 mm2 | |
| Housing width | 20 mm | |
| Housing depth | 30.5 mm | |
| Housing length L | see Table 1, max. 2260 mm | |
| Degree of protection | IP67 | |
| Connection | Emitter: connecting cable with 4-pin, M12 x 1 connector , 330 mm total length Receiver: connecting cable with 8-pin, M12 x 1 connector , 350 mm total length | |
| Material | ||
| Housing | extruded aluminum section , Silver anodized | |
| Optical face | Plastic pane , Polycarbonate | |
| Mass | see Table 1, max. 1200 g (per profile) | |
| Cable length | max. 30 m | |
| ECLASS 13.0 | 27270910 | |
| ECLASS 12.0 | 27270910 | |
| ECLASS 11.0 | 27270910 | |
| ECLASS 10.0.1 | 27270910 | |
| ECLASS 9.0 | 27270910 | |
| ECLASS 8.0 | 27270910 | |
| ECLASS 5.1 | 27270910 | |
| ETIM 9.0 | EC002549 | |
| ETIM 8.0 | EC002549 | |
| ETIM 7.0 | EC002549 | |
| ETIM 6.0 | EC002549 | |
| ETIM 5.0 | EC002549 | |
| UNSPSC 12.1 | 39121528 | |
Buy Pepperl+Fuchs LGS8 with the best possible price and delivery terms on eltra-trade.com
Discover a wide range of industrial electrical products at eltra-trade.com. We specialize in finding any part you need and providing prompt delivery. Benefit from our premium quality products and competitive prices. Partner with us for your electrical supply needs and experience outstanding service.
Comments
No comments yet