Pepperl+Fuchs LS682-DA-EN/F1/146
Optical data coupler
We ship to United States of America!
- Fast Ethernet- Powerlink- EtherCAT- Profinet
- Independent of Ethernet protocol
- Version for low temperature applications
- Plug connection for fast mounting
- No parameterization
- Line indicator for signal strength
Item Number:
LS682-DA-EN/F1/146
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Diagnostic Coverage (DC) | 0 % |
| Laser safety | EN 60825-1:2007 |
| Light type | modulated infrared light |
| No-load supply current | 200 mA |
| Ambient temperature | -30 ... 50 В°C (-22 ... 122 В°F) |
| UL approval | cULus Listed |
| Function indicator | Signal strength (8 LED: Red, yellow, green) |
| FDA approval | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
| Light source | laser diode |
| Diameter of the light spot | 1.5 m at a distance of 100 m |
| Operating voltage | 18 ... 30 V DC |
| Effective detection range | 0 ... 150 m |
| Threshold detection range | 180 m |
| Data rate | 100 MBit/s (Fast Ethernet) |
| Ambient light limit | > 10000 Lux |
| Pre-fault indication output | 1 PNP, inactive when falling short of the stability control , short-circuit protected, max. 200 mA |
| Angle of divergence | 1 В° |
| MTTFd | 58.6 a |
| Data flow indicator | LED green: OPTO-Link LED yellow: LAN-Link LED red: ERROR |
| Degree of protection | IP65 |
| Mission Time (TM) | 10 a |
| Interface type | 100 BASE-TX |
| Mass | 700 g |
| Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
Buy Pepperl+Fuchs LS682-DA-EN/F1/146 with the best possible price and delivery terms on eltra-trade.com
Eltra Trade s.r.o. is a trusted industrial automation supplier. We offer a vast selection of products from renowned manufacturers. Worldwide delivery is available, ensuring you receive your order promptly. Competitive prices and exceptional service are our priorities. Experience the benefits of partnering with us for your automation needs.
Comments
No comments yet