Pepperl+Fuchs LS684-DA-EN/F1
Optical data coupler
- Fast Ethernet- Powerlink- EtherCAT- Profinet
- Independent of Ethernet protocol
- Optimized for real-time Ethernet such as PROFINET IRT and EtherCAT
- No parameterization
- Line indicator for signal strength
Item Number:
LS684-DA-EN/F1
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Angle of divergence | 1 В° |
| Diameter of the light spot | 1.5 m at a distance of 100 m |
| Storage temperature | -20 ... 70 В°C (-4 ... 158 В°F) |
| Operating voltage | 18 ... 30 V DC |
| Effective detection range | 0 ... 150 m |
| Light type | modulated infrared light |
| Mission Time (TM) | 10 a |
| Diagnostic Coverage (DC) | 0 % |
| Degree of protection | IP65 |
| FDA approval | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
| Function indicator | Signal strength (8 LED: Red, yellow, green) |
| No-load supply current | 200 mA |
| UL approval | cULus Listed |
| Data rate | 100 MBit/s (Fast Ethernet) |
| Laser safety | EN 60825-1:2007 |
| Pre-fault indication output | 1 PNP, inactive when falling short of the stability control , short-circuit protected, max. 200 mA |
| Mass | 700 g |
| Ambient light limit | > 10000 Lux |
| Light source | laser diode |
| Signal delay | 2.9 micro/s (across the entire effective operating distance) |
| Ambient temperature | -10 ... 50 В°C (14 ... 122 В°F) |
| Interface type | 100 BASE-TX |
| Threshold detection range | 180 m |
| Data flow indicator | LED green: OPTO-Link LED yellow: LAN-Link LED red: ERROR |
| MTTFd | 58.6 a |
Comments
No comments yet