Pepperl+Fuchs M-LB-4.275TNS.D Surge Protection Barrier


Item Number: M-LB-4.275TNS.D
- Surge protection for 4 supply lines
- Type 2 acc. to EN 61643-11
- For TN-S systems (230 V AC/400 V AC)
- Pre-wired unit
- Operating state and fault indication of every protected line
- Fault indication output
- DIN rail mountable
- Overview
- Datasheet
- Alternative numbers
- Comments
Outputvolt-free change-over contact
Display elements | status display operating state (green) fault indication (red) |
Degree of protection | IEC 60529 |
Degree of protection | IP20 |
Ambient temperature | -40 ... 80 В°C (-40 ... 176 В°F) |
Nominal voltage | 230 V AC, 50 ... 60 Hz 400 V AC, 50 ... 60 Hz |
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Shock resistance | EN 60068-2 |
Overcurrent protection | max. 125 A gG , mains-side |
Switch power | AC: 250 V / 0.5 A DC: 250 V/0.1 A; 125 V/0.2 A; 75 V/0.5 A; 24 V/0.5 A |
Short-circuit-proof | 50 kA eff |
Device type | type 2 acc. to EN 61643-11 class II acc. to IEC 61643-1 |
Network configuration | TN-S |
Number of protected supply lines | 4 |
Reaction time | max. 25 ns |
Nominal discharge current (8/20 µs) | 20 kA |
Maximum continuous operating voltage | 275 V AC, 50 ... 60 Hz |
Vibration resistance | EN 60068-2 |
Connection | terminals 11, 12, 14 |
Max. surge current (8/20 µs) | 40 kA |
Suitable components | protection module M-LB-1.275.M |
Core cross-section | - min. 1.5 mm2 solid/flexible - max. 35 mm2 stranded/25 mm2 flexible - max. 1.5 mm2 solid/flexible (for remote signalling contact) |
Mass | approx. 480 g |
Temporary over-voltage | 335 V / 5 s (TOV withstand) |
Voltage protection level | max. 1.25 kV max. 1 kV at 5 kA |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Dimensions | 72 x 90 x 73 mm (2.8 x 3.6 x 2.9 inch) (4 TE acc. to DIN 43880) |
Relative humidity | 5 ... 95 % |
People also buy
Comments
No comments yet