Pepperl+Fuchs M100/MV100-IR/76a/95/103 Thru-beam sensor
Item Number: M100/MV100-IR/76a/95/103
- Miniature design
- Easy to use
- Full metal thread mounting
- Highly visible LEDs for Power ON and switching state
- Not sensitive to ambient light
- Overview
- Datasheet
- Alternative numbers
- Comments
| Function indicator | Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the stability control ; OFF when light beam is interrupted |
| Diagnostic Coverage (DC) | 0 % |
| Connection | M8 x 1 connector, 4-pin |
| Light type | modulated infrared light |
| Effective detection range | 0 ... 15 m |
| Control elements | Light-on/dark-on changeover switch |
| Control elements | sensitivity adjustment |
| Degree of protection | IP67 |
| Threshold detection range | 20 m |
| Switching type | The switching type of the sensor is adjustable. The default setting is: light on |
| Light source | LED |
| Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector |
| MTTFd | 860 a |
| Angle of divergence | approx. 2 В° |
| Diameter of the light spot | approx. 1.5 m at a distance of 20 m |
| Receiver | MV100-IR/95/103 |
| Emitter | M100-IR/76a/95 |
| Operating voltage | 10 ... 30 V DC |
| Mission Time (TM) | 20 a |
Comments
No comments yet