Pepperl+Fuchs M41/MV41/25/76a/95/136 Thru-beam sensor

Pepperl+Fuchs M41/MV41/25/76a/95/136
Item Number: M41/MV41/25/76a/95/136
  • Rugged series in corrosion-resistant metal housing
  • Long sensor range with high power mode
  • Resistant against noise: reliable operation under all conditions
  • Clear and functional display concept for the operating modes
  • Aluminum housing with high quality Delta-Seal coated
  • Scratch-resistant and solvent resistant glass lens
Price on Request
Quantity
-
+
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Housing width31 mm
Switching voltagemax. 30 V DC
Storage temperature-40 ... 75 В°C (-40 ... 167 В°F)
Housing height56.5 mm
EmitterM41/76a/95
Light typenormal mode: modulated visible red light High power mode: Red and infrared, modulated light
MTTFd844 a
CCC approvalCCC approval / marking not required for products rated 36 V
Operation indicatorLED green: power on
Switching frequency1000 Hz
Control elementssensitivity adjustment (receiver)
Signal output2 push-pull (4 in 1) outputs, complementary, short-circuit proof, reverse polarity protected
Voltage drop 2.5 V DC
No-load supply currentmax. 30 mA
Operating voltage10 ... 30 V DC , class 2
Switching typelight on
Mission Time (TM)20 a
Housing depth13.6 mm
ReceiverMV41/25/95/136
Threshold detection rangenormal mode: 25 m High power mode: 35 m (Control input at UB+)
Degree of protectionIP67
Effective detection range0 ... 16 m
Light sourcenormal mode: LED High power mode: LED+IRED
Control inputHigh power mode activation with +UB (emitter)
Ambient light limit50000 Lux
Diameter of the light spotapprox. 500 mm at detection range 16 m
Ambient temperature-40 ... 60 В°C (-40 ... 140 В°F)
ConnectionM8 x 1 connector, 4-pin
Function indicatorReceiver: LED yellow, lights up when light beam is free, flashes when falling short of the stability control ; OFF when light beam is interrupted
Response time0.5 ms
Angle of divergenceapprox. 1.5 В°
Optical facefrontal
Test inputemitter deactivation at +UB (emitter)
Switching currentmax. 100 mA
Ripplemax. 10 %
Mass50 g (device)
UL approvalcULus Listed, Class 2 Power Source, Type 1 enclosure
Diagnostic Coverage (DC)0 %

Comments

No comments yet

Write a comment

captcha
in international format without spaces
All fields are required