Pepperl+Fuchs ML100-54-F/25/102/115/154
Retroreflective sensor
- Miniature design
- No controls
- Easy to use
- Clearly visible LEDs for Power ON, switching state and weak signal indication
- Very bright, highly visible light spot
- Full metal thread mounting
- Not sensitive to ambient light
Item Number:
ML100-54-F/25/102/115/154
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Connection | 2 m fixed cable |
| Housing width | 11 mm |
| Voltage drop | 1.5 V DC |
| UL approval | cULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according UL248), Type 1 enclosure |
| Diameter of the light spot | approx. 200 mm at a distance of 3 m |
| No-load supply current | < 20 mA |
| Housing depth | 20 mm |
| Degree of protection | IP67 |
| Light source | LED |
| Switching voltage | max. 30 V DC |
| Reflector distance | 0.02 ... 2.7 m |
| Switching type | light on |
| Switching current | max. 100 mA , resistive load |
| Tightening torque, fastening screws | 0.6 Nm |
| Ambient light limit | EN 60947-5-2:2007+A1:2012 |
| Cable length | 2 m |
| Mass | approx. 50 g |
| Light type | modulated visible red light |
| Signal output | 1 NPN output, short-circuit protected, reverse polarity protected, open collector |
| Mission Time (TM) | 20 a |
| Effective detection range | 0 ... 2.7 m |
| Housing height | 31 mm |
| Switching frequency | 1000 Hz |
| Optical face | frontal |
| Response time | 0.5 ms |
| Operating voltage | 10 ... 30 V DC |
| Polarization filter | yes |
| Diagnostic Coverage (DC) | 0 % |
| Ambient temperature | -30 ... 60 В°C (-22 ... 140 В°F) |
| Angle of divergence | approx. 4 В° |
| Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
| Reference target | H50 reflector |
| MTTFd | 860 a |
| Ripple | max. 10 % |
| Threshold detection range | 3 m |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Function indicator | LED yellow: lights up when receiving the light beam ; flashes when falling short of the stability control; OFF when light beam is interrupted |
| Operation indicator | LED green: power on |
Comments
No comments yet