Pepperl+Fuchs ML100-55/25/33/103/115a/154-1M Retroreflective sensor

Pepperl+Fuchs ML100-55/25/33/103/115a/154-1M
Item Number: ML100-55/25/33/103/115a/154-1M
  • No controls
  • Miniature design
  • Easy to use
  • Clearly visible LEDs for Power ON, switching state and weak signal indication
  • Very bright, highly visible light spot
  • Full metal thread mounting
  • Not sensitive to ambient light
Price on Request
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Operating voltage10 ... 30 V DC
ConnectionFixed cable 1000 mm with 4-pin M8 connector
CCC approvalCCC approval / marking not required for products rated ≤36 V
UL approvalcULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according UL248), Type 1 enclosure
Ripplemax. 10 %
Switching typelight on
No-load supply current< 20 mA
Reflector distance0.01 ... 5 m
Operation indicatorLED green: power on
Function indicatorLED yellow: lights up when receiving the light beam ; flashes when falling short of the stability control; OFF when light beam is interrupted
Housing height31 mm
Housing depth20 mm
Signal output1 PNP output, short-circuit protected, reverse polarity protected, open collector
Mission Time (TM)20 a
Response time0.5 ms
Ambient temperature-30 ... 60 В°C (-22 ... 140 В°F)
Polarization filteryes
Massapprox. 30 g
Tightening torque, fastening screws0.6 Nm
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
Voltage drop≤ 1.5 V DC
Reference targetH50 reflector
Effective detection range0 ... 5 m
Angle of divergenceapprox. 4 В°
Cable length1 m
Switching voltagemax. 30 V DC
Light sourceLED
Diameter of the light spotapprox. 500 mm at a distance of 7 m
Degree of protectionIP67
Ambient light limitEN 60947-5-2:2007+A1:2012
Switching frequency1000 Hz
Diagnostic Coverage (DC)0 %
Housing width11 mm
Light typemodulated visible red light
Threshold detection range7 m
MTTFd860 a
Optical facefrontal
Switching currentmax. 100 mA , resistive load


No comments yet

Write a comment

in international format without spaces
All fields are required