Pepperl+Fuchs ML100-55-G/95/103
Retroreflective sensor for glass detection
- Miniature design
- Detects transparent materials
- TEACH-IN switch for setting the contrast detection levels
- Automatic adjustment in case of soiling in contrast detection mode
- Very bright, highly visible light spot
- Full metal thread mounting
Item Number:
ML100-55-G/95/103
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| MTTFd | 860 a |
| Switching frequency | 1000 Hz |
| Reflector distance | 0.05 ... 2.5 m |
| Effective detection range | 0 ... 2.5 m |
| No-load supply current | < 20 mA |
| Connection | Connector M8 x 1 , 4-pin |
| Angle of divergence | approx. 4 В° |
| Contrast detection levels | 18 % - clear glass bottles 40 % - colored glass or opaque materials adjustable due to Teach-In switch |
| Diagnostic Coverage (DC) | 0 % |
| Housing width | 11 mm |
| Mission Time (TM) | 20 a |
| Threshold detection range | 2.5 m |
| Switching type | The switching type of the sensor is adjustable. The default setting is: light on |
| Function indicator | LED yellow: lights up when receiving the light beam OFF when light beam is interrupted |
| Operating voltage | 10 ... 30 V DC |
| Diameter of the light spot | approx. 180 mm at a distance of 2.5 m |
| Light source | LED |
| Control elements | Teach-In rotary switch |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Operation indicator | LED green: power on Teach-In : LED yellow/green; equiphase flashing; 2,5 Hz Teach Error:LED green/yellow non equiphase flashing; 8.0 Hz |
| Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
| Switching voltage | max. 30 V DC |
| Housing height | 31 mm |
| Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector |
| Optical face | frontal |
| Voltage drop | 1.5 V DC |
| Ripple | max. 10 % |
| Light type | modulated visible red light |
| Mass | approx. 10 g |
| UL approval | cULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according UL248), Type 1 enclosure |
| Degree of protection | IP67 |
| Ambient light limit | EN 60947-5-2:2007+A1:2012 |
| Ambient temperature | -30 ... 60 В°C (-22 ... 140 В°F) |
| Tightening torque, fastening screws | 0.6 Nm |
| Polarization filter | yes |
| Control elements | Light-on/dark-on changeover switch preset to light on |
| Reference target | H50 reflector |
| Response time | 0.5 ms |
| Housing depth | 20 mm |
| Switching current | max. 100 mA , resistive load |
Comments
No comments yet