Pepperl+Fuchs ML100-8-1000-RT/103/115a-1M Diffuse mode sensor

Pepperl+Fuchs ML100-8-1000-RT/103/115a-1M
Item Number: ML100-8-1000-RT/103/115a-1M
  • Miniature design
  • Easy to use
  • Very bright, highly visible light spot
  • Full metal thread mounting
  • Highly visible LEDs for Power ON and switching state
  • Not sensitive to ambient light
Price on Request
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
CCC approvalCCC approval / marking not required for products rated 36 V
Ripplemax. 10 %
Optical facefrontal
UL approvalcULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according UL248), Type 1 enclosure
Control elementsLight-on/dark-on changeover switch
No-load supply current< 20 mA
Angle of divergenceapprox. 2 В°
Mission Time (TM)20 a
Signal output1 PNP output, short-circuit protected, reverse polarity protected, open collector
Switching currentmax. 100 mA , resistive load
Polarization filterno
Response time0.5 ms
Cable length1 m
Detection range0 ... 1000 mm
Switching frequency1000 Hz
Switching typeThe switching type of the sensor is adjustable. The default setting is: light on
Massapprox. 30 g
Reference targetstandard white, 100 mm x 100 mm
Ambient light limitEN 60947-5-2:2007+A1:2012
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
Operating voltage10 ... 30 V DC
MTTFd860 a
Operation indicatorLED green: power on
Light typemodulated visible red light
Ambient temperature-30 ... 60 В°C (-22 ... 140 В°F)
Housing width11 mm
Function indicatorLED yellow, lights up with receiver lit
Switching voltagemax. 30 V DC
Diameter of the light spotapprox. 75 mm at a distance of 1000 mm
Adjustment range100 ... 1000 mm
EAC conformityTR CU 020/2011
Control elementssensitivity adjustment
ConnectionFixed cable 1000 mm with 4-pin M8 connector
Voltage drop 1.5 V DC
Diagnostic Coverage (DC)0 %
Housing height31 mm
Housing depth20 mm
Light sourceLED
Degree of protectionIP67


No comments yet

Write a comment

in international format without spaces
All fields are required