Pepperl+Fuchs MLV12-54-2563/49/124
Fire protection retroreflective sensor
- Small fire protection photoelectric sensor for safety devices on fire barriers
- Approval in accordance with VdS Test Report FSA and externally monitored manufacture (Гњ Symbol)
- High protection against contact
- Not sensitive to ambient light, even with switched energy saving lamps
Item Number:
MLV12-54-2563/49/124
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Degree of protection | IP67 |
| Switching current | max. 0.2 A |
| Ambient temperature | -40 ... 60 В°C (-40 ... 140 В°F) |
| Voltage drop | 2.5 V DC |
| Diameter of the light spot | approx. 70 mm |
| Switching type | light/dark on switchable |
| Switching voltage | max. 30 V DC |
| Reference target | H60 reflector |
| Signal output | 1 NPN and 1 PNP output, direct switching, short-circuit protected, reverse polarity protected, open collector |
| Operation indicator | LED green, flashes in case of short-circuit |
| Relative humidity | 30% ... 85% non-condensing ; Non-icing |
| Operating voltage | 10 ... 30 V DC |
| Response time | 10 ms |
| Light type | modulated visible red light |
| Control elements | rotary switch for light/dark |
| Switching frequency | 40 Hz |
| Connection | 5-pin M12 x 1 connector with metal thread, 90В° rotatable |
| Light source | LED 645 nm |
| Storage temperature | -40 ... 75 В°C (-40 ... 167 В°F) |
| Ambient light limit | 50000 Lux |
| Mass | 60 g |
| Standards | EN 60947-5-2 smoke insensitive up to 2 dB/m ( EN 54-12 ) |
| Angle of divergence | 1.5 В° |
| Ripple | max. 10 % |
| Function indicator | 2 LEDs yellow, light up when light beam is free, flash when falling short of the stability control, off when light beam is interrupted |
| Approvals | VdS/DIBt certificate of compliance No. 25020 |
| No-load supply current | max. 40 mA |
| Reflector distance | 0.2 ... 2.1 m |
| Protection class | II, rated voltage 300 V AC with pollution degree 1-2 according to IEC 60664-1 |
| UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure |
| Effective detection range | 0 ... 2.1 m (with H60 reflector) |
| CCC approval | CCC approval / marking not required for products rated 36 V |
Comments
No comments yet