| Interface type | IO-Link | | Housing depth | 13.6 mm |
| Threshold detection range | 10 m
|
| UL approval | cULus Listed 57M3 (Only in association with UL Class 2 power supply; Type 1 enclosure) |
| No-load supply current | max. 30 mA |
| Response time | 0.5 ms |
| Ambient light limit | 20000 Lux |
| Function indicator | LED yellow, lights up when light beam is free, flashes when falling short of the stability control |
| Switching frequency | 1000 Hz |
| Degree of protection | IP67 |
| Storage temperature | -40 ... 75 В°C (-40 ... 167 В°F) |
| Optical face | frontal |
| Diameter of the light spot | approx. 300 mm at detection range 8.5 m |
|
| Effective detection range | 0 ... 8 m Detection range is preset to 0 ... 0.5 m |
| Signal output | 2 push-pull (4 in 1) outputs, complementary, short-circuit proof, reverse polarity protected |
| Mission Time (TM) | 20 a |
| Angle deviation | max. В± 1.5 В° |
| Voltage drop | 2.5 V DC |
| Housing width | 31 mm |
| Switching voltage | max. 30 V DC |
| Ambient temperature | -40 ... 60 В°C (-40 ... 140 В°F) |
| Reflector distance | 0.1 ... 8 m |
| Reference target | H50 reflector |
| Connection | 4-pin, M12 x 1 connector |
|
| Control elements | none |
| Light source | LED |
| Protocol | IO-Link V1.0 |
|
| Operating voltage | 10 ... 30 V DC |
| Housing height | 56.5 mm |
| Switching current | max. 100 mA |
| Operation indicator | LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz) , IO link communication: green LED goes out briefly (1 Hz) |
| Ripple | max. 10 % |
| MTTFd | 844 a |
| Angle of divergence | 1.5 В° |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Mode | COM 2 (38.4 kBaud) |
| Mass | 50 g |
| Diagnostic Coverage (DC) | 0 % |
| Light type | modulated visible red light , 625 nm |
| Polarization filter | yes |
Comments
No comments yet