Pepperl+Fuchs MLV41-6/25/95/136 Retroreflective sensor

Pepperl+Fuchs MLV41-6/25/95/136
Item Number: MLV41-6/25/95/136
  • Rugged series in corrosion-resistant metal housing
  • Extremely high switching frequency
  • Clear and functional display concept for the operating modes
  • Resistant against noise: reliable operation under all conditions
  • Aluminum housing with high quality Delta-Seal coated
The price is not final. Please check with the manager!
Total price: 228.96
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments

Switching frequency1000 Hz

Housing depth13.6 mm
No-load supply currentmax. 30 mA
Storage temperature-40 ... 75 В°C (-40 ... 167 В°F)
Housing height56.5 mm
Angle deviationmax. В± 1.5 В°
Reference targetOFR-22800/76 , H85-2 reflector
Switching currentmax. 100 mA
Ambient temperature-40 ... 60 В°C (-40 ... 140 В°F)
Control elementsnone
Diagnostic Coverage (DC)0 %
Signal output2 push-pull (4 in 1) outputs, complementary, short-circuit proof, reverse polarity protected
Response time0.5 ms
Ripplemax. 10 %
Mission Time (TM)20 a
Threshold detection range12 m
CCC approvalCCC approval / marking not required for products rated 36 V
Switching voltagemax. 30 V DC
Degree of protectionIP67
ConnectionM8 x 1 connector, 4-pin
Polarization filterno
Ambient light limit20000 Lux
UL approvalcULus Listed 57M3 (Only in association with UL Class 2 power supply; Type 1 enclosure)
Effective detection range0 ... 9.5 m
Voltage drop2.5 V DC
Angle of divergence1.5 В°
Reflector distanceFoil reflector 0.05 ... 3 m
Retro-reflector 0.01 ... 9.5 m
Diameter of the light spotapprox. 300 mm at detection range 8.5 m
Light typemodulated visible red light , 625 nm
Mass50 g
Operating voltage10 ... 30 V DC
MTTFd940 a
Housing width31 mm
Optical facefrontal
Function indicatorLED yellow, lights up when light beam is free, flashes when falling short of the stability control
Operation indicatorLED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz)
Light sourceLED


No comments yet

Write a comment