Pepperl+Fuchs MLV41-6-IO/98/103
Retroreflective sensor
- Rugged series in corrosion-resistant metal housing
- IO-link interface for service and process data
- Extremely high switching frequency
- Clear and functional display concept for the operating modes
- Resistant against noise: reliable operation under all conditions
- Aluminum housing with high quality Delta-Seal coated
Item Number:
MLV41-6-IO/98/103
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Mode | COM 2 (38.4 kBaud) |
| Housing depth | 13.6 mm |
| UL approval | cULus Listed 57M3 (Only in association with UL Class 2 power supply; Type 1 enclosure) |
| Effective detection range | 0 ... 9.5 m |
| Degree of protection | IP67 |
| Switching voltage | max. 30 V DC |
| Connection | M8 x 1 connector, 3-pin |
| Optical face | frontal |
| Switching current | max. 100 mA |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector |
| Angle of divergence | 1.5 В° |
| Mission Time (TM) | 20 a |
| Reflector distance | Foil reflector 0.05 ... 3 m Retro-reflector 0.01 ... 9.5 m |
| Reference target | OFR-22800/76 , H85-2 reflector |
| Angle deviation | max. В± 1.5 В° |
| Light source | LED |
| Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) 60 ... 70 В°C (140 ... 158 В°F) ; max. 20,000 hours = 2.5 years (continuous operation) |
| Interface type | IO-Link |
| Threshold detection range | 12 m |
| Housing height | 56.5 mm |
| Protocol | IO-Link V1.0 |
| Ripple | max. 10 % |
| Light type | modulated visible red light , 625 nm |
| No-load supply current | max. 30 mA |
| Control elements | none |
| Response time | 0.5 ms |
| Operating voltage | 10 ... 30 V DC |
| MTTFd | 940 a |
| Switching frequency | 1000 Hz |
| Storage temperature | -40 ... 75 В°C (-40 ... 167 В°F) |
| Diameter of the light spot | approx. 300 mm at detection range 8.5 m |
| Diagnostic Coverage (DC) | 0 % |
| Function indicator | LED yellow, lights up when light beam is free, flashes when falling short of the stability control |
| Operation indicator | LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz) , IO link communication: green LED goes out briefly (1 Hz) |
| Mass | 50 g |
| Voltage drop | 2.5 V DC |
| Ambient light limit | 20000 Lux |
| Polarization filter | no |
| Housing width | 31 mm |
Comments
No comments yet