Pepperl+Fuchs NBB1,5-5GM25-E3-V3 Inductive sensor
Item Number: NBB1,5-5GM25-E3-V3
- Basic series
- 1.5 mm flush
- Overview
- Datasheet
- Alternative numbers
- Comments
| MTTFd | 1149 a |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Housing diameter | 5 mm |
| Reduction factor r304 | 0.85 |
| Actuating element | 5 mm x 5 mm x 1 mm |
| Reduction factor rCu | 0.38 |
| Reverse polarity protection | reverse polarity protected |
| Off-state current | 0 ... 0.1 mA typ. 0.1 andmicro;A at 25 В°C |
| Output type | PNP |
| Diagnostic Coverage (DC) | 0 % |
| Connection type | Connector M8 x 1 , 3-pin |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| Voltage drop | 3 V |
| Degree of protection | IP67 |
| Rated operating distance | 1.5 mm |
| UL approval | cULus Listed, General Purpose |
| Operating current | 0 ... 200 mA |
| Switching state indicator | LED, yellow |
| Output polarity | DC |
| Sensing face | POM |
| Switching frequency | 0 ... 3000 Hz |
| Output type | 3-wire |
| Reduction factor rBrass | 0.54 |
| No-load supply current | 10 mA |
| CSA approval | cCSAus Listed, General Purpose |
| Operating voltage | 10 ... 30 V |
| Short-circuit protection | pulsing |
| Assured operating distance | 0 ... 1.215 mm |
| Mission Time (TM) | 20 a |
| Switching function | Normally closed (NC) |
| Reduction factor rAl | 0.41 |
| Hysteresis | 1 ... 15 % |
| Installation | flush |
Comments
No comments yet