Pepperl+Fuchs NBB2-12GM40-E2-5M-Y70105360
Inductive sensor
- 2 mm flush
- Overview
- Comments
| Output type | PNP |
| Scope of delivery | Supplied with 2 nuts Supplied with 2 toothed lock washers |
| Housing material | brass, nickel-plated |
| MTTFd | 3220 a |
| Reduction factor r304 | 0.7 |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Core cross-section | 0.14 mm2 |
| No-load supply current | 15 mA |
| Assured operating distance | 0 ... 1.62 mm |
| Degree of protection | IP67 |
| Switching frequency | 0 ... 1000 Hz |
| Operating current | 0 ... 100 mA |
| Mission Time (TM) | 20 a |
| Reverse polarity protection | reverse polarity protected |
| Operating voltage | 10 ... 30 V |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Connection type | cable PUR , 5 m |
| Output polarity | DC |
| Voltage drop | 3 V |
| Rated operating distance | 2 mm |
| Hysteresis | typ. 5% |
| Sensing face | PBT |
| Reduction factor rAl | 0.3 |
| Installation | flush |
| Reduction factor rCu | 0.2 |
| Short-circuit protection | pulsing |
| UL approval | cULus Listed, General Purpose |
| Output type | 3-wire |
| Off-state current | 0 ... 0.5 mA typ. 0.1 andmicro;A at 25 В°C |
| Switching function | Normally open (NO) |
| Diagnostic Coverage (DC) | 0 % |
| Switching state indicator | all direction LED, yellow |
Comments
No comments yet