Pepperl+Fuchs NBB2-8GM20-E3-V3-Y0220 Inductive sensor
Item Number: NBB2-8GM20-E3-V3-Y0220
- 2 mm flush
- Increased operating distance
- Extended temperature range
-40 ... +85 В°C - Full-length thread
- Overview
- Datasheet
- Alternative numbers
- Comments
| Operating current | 0 ... 100 mA |
| Switching frequency | 0 ... 6000 Hz |
| Time delay before availability | ≤ 100 ms |
| Output type | 3-wire |
| Off-state current | 0 ... 0.2 mA |
| Reduction factor rBrass | 0.45 |
| Short-circuit protection | pulsing |
| Ambient temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Reduction factor rCu | 0.3 |
| Reverse polarity protection | reverse polarity protected |
| Installation | flush |
| Switching function | Normally closed (NC) |
| Diagnostic Coverage (DC) | 0 % |
| Operating voltage | 5 ... 30 V |
| Degree of protection | IP67 |
| Sensing face | LCP |
| Hysteresis | typ. 5% |
| Reduction factor r304 | 0.75 |
| No-load supply current | ≤ 10 mA |
| Voltage drop | ≤ 1.5 V |
| Mission Time (TM) | 20 a |
| UL approval | cULus Listed, General Purpose, Class 2 Power Source |
| Scope of delivery | 2 hex nuts included |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Housing material | brass, nickel-plated |
| MTTFd | 960 a |
| Assured operating distance | 0 ... 1.62 mm |
| Connection type | Connector plug M8 x 1 , 3-pin |
| Rated operating distance | 2 mm |
| Reduction factor rAl | 0.4 |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 8 mm x 8 mm x 1 mm |
| Switching state indicator | Multihole-LED, yellow |
| Output type | PNP |
| Output polarity | DC |
Comments
No comments yet