Pepperl+Fuchs NBB2-8GM40-A2-V1
Inductive sensor
- Overview
- Comments
Reduction factor rAl0.4
2 mm flush
Increased operating distance
Extended temperature range
-40 ... +85 В°C
Output type | PNP |
UL approval | cULus Listed, General Purpose, Class 2 Power Source |
CCC approval | CCC approval / marking not required for products rated 36 V |
Rated operating distance | 2 mm |
Operating voltage | 5 ... 30 V |
Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 8 mm x 8 mm x 1 mm |
Switching frequency | 0 ... 6000 Hz |
Short-circuit protection | pulsing |
No-load supply current | 10 mA |
Reduction factor rBrass | 0.45 |
Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
Mass | 20 g |
Reverse polarity protection | reverse polarity protected |
Time delay before availability | 100 ms |
Scope of delivery | 2 hex nuts included |
MTTFd | 960 a |
Reduction factor r304 | 0.75 |
Degree of protection | IP67 |
Hysteresis | typ. 5% |
Diagnostic Coverage (DC) | 0 % |
Installation | flush |
Connection type | Connector plug M12 x 1 , 4-pin |
Switching state indicator | Multihole-LED, yellow |
Housing material | brass, nickel-plated |
Reduction factor rCu | 0.3 |
Ambient temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
Sensing face | LCP |
Off-state current | 0 ... 0.2 mA |
Output type | 4-wire |
Switching function | complementary |
Operating current | 0 ... 100 mA |
Voltage drop | 1.5 V |
Output polarity | DC |
Mission Time (TM) | 20 a |
Assured operating distance | 0 ... 1.62 mm |
Comments
No comments yet