Pepperl+Fuchs NBB20-U4-UU
Inductive sensor
Inductive sensor
- Overview
- Comments
Protection classI
Sensor head bidirectional and rotatable
NO/NC selectable
Comfort series
Metal base with ground connection
Momentary current (20 ms, 0.1 Hz) | 0 ... 3000 mA |
Reduction factor rAl | 0.4 |
Off-state current | 1.5 mA |
Voltage drop | 5 V (typ. 2V) DC operation 8 V (typ. 2V) AC operation |
Switching state indicator | LED, yellow |
Switching frequency | AC, 0 ... 30 Hz DC, 0 ... 100 Hz |
Reverse polarity protection | reverse polarity tolerant |
Switching function | Normally open/closed (NO/NC) |
UL approval | cULus Listed, General Purpose |
Reduction factor r304 | 0.77 |
Ambient temperature | -25 ... 85 В°C (-13 ... 185 В°F) |
Sensing face | PA 6.6 |
Reduction factor rFe | 1 |
Housing material | PA 6.6 / metal |
Actual operating distance | 18 ... 22 mm |
Core cross-section | up to 2.5 mm2 |
Mission Time (TM) | 20 a |
Reduction factor rCu | 0.3 |
Connection type | terminal compartment |
Storage temperature | -25 ... 85 В°C (-13 ... 185 В°F) |
Information for connection | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % |
Operating voltage indicator | LED, green |
CCC approval | Ue 75VDC - 250VDC Ue 75VAC - 230VAC |
Reduction factor rBrass | 0.43 |
Rated operating distance | 20 mm |
Operating current | 5 ... 500 mA |
Error indicator | flashes when overcurrent |
Output polarity | AC/DC |
Hysteresis | 1 ... 10 typ. 5 % |
Output type | 2-wire |
Short-circuit protection | pulsing |
Degree of protection | IP67 |
Diagnostic Coverage (DC) | 0 % |
MTTFd | 540 a |
Operating voltage | 20 ... 300 V DC / 20 ... 253 V AC |
Assured operating distance | 0 ... 16.2 mm |
Output type | Two-wire |
Installation | flush |
Comments
No comments yet