Pepperl+Fuchs NBB8-18GM35-A0-M1-965MM-4DTM04 Inductive sensor
Item Number: NBB8-18GM35-A0-M1-965MM-4DTM04
- 8 mm flush
- Increased operating distance
- Extended temperature range
-40 ... +85 В°C - E1-Type approval
- Overview
- Datasheet
- Alternative numbers
- Comments
| Mass | 80 g |
| Voltage drop | ≤ 2 V |
| Output polarity | DC |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Connection type | Cable connector L = 0.965 m Deutsch Connector Assembly Connector DTM04-4P Contact 1060-20-0244 Wedge WM-4P |
| Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 24 mm x 24 mm x 1 mm |
| E1 Type approval | 10R-04 |
| MTTFd | 1484 a |
| Time delay before availability | ≤ 100 ms |
| Assured operating distance | 0 ... 6.48 mm |
| Output type | 4-wire |
| Operating voltage | 7 ... 30 V |
| Ambient temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Switching frequency | 0 ... 1600 Hz |
| Output type | NPN |
| Reduction factor rBrass | 0.45 |
| Degree of protection | IP67 / IP68 |
| Switching state indicator | LED, yellow |
| Rated operating distance | 8 mm |
| Reduction factor rAl | 0.4 |
| Reverse polarity protection | reverse polarity protected |
| Operating current | 0 ... 200 mA |
| Core cross-section | 0.34 mm2 |
| Reduction factor rCu | 0.3 |
| Housing material | brass, nickel-plated |
| Diagnostic Coverage (DC) | 0 % |
| Sensing face | PBT |
| Installation | flush |
| Short-circuit protection | pulsing |
| No-load supply current | ≤ 10 mA |
| Hysteresis | typ. 5% |
| Off-state current | 0 ... 0.5 mA typ. 4 µA at 25 В°C |
| Reduction factor r304 | 0.7 |
| Scope of delivery | 2 self locking nuts in scope of delivery |
| Mission Time (TM) | 20 a |
| Switching function | complementary |
Comments
No comments yet