Pepperl+Fuchs NBB8-F33-E2-0,2M-V1 Inductive sensor
Item Number: NBB8-F33-E2-0,2M-V1
- 8 mm flush
- 3-wire DC
- Overview
- Datasheet
- Alternative numbers
- Comments
| Reduction factor rCu | 0.2 |
| Operating voltage | 10 ... 30 V DC |
| UL approval | cULus Listed, General Purpose |
| Note | Tightening torque: 5 Nm |
| Housing material | PBT |
| Switching state indicator | LED yellow |
| Connection type | Cable connector M12 x 1 , 3-pin , L = 0.2 m |
| Ambient temperature | -35 ... 70 В°C (-31 ... 158 В°F) |
| Installation | flush |
| Voltage drop | ≤ 3 V |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| No-load supply current | ≤ 10 mA |
| Mission Time (TM) | 20 a |
| Reverse polarity protection | reverse polarity protected |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Assured operating distance | 0 ... 6.48 mm |
| Reduction factor rAl | 0.3 |
| Switching frequency | 0 ... 350 Hz |
| Diagnostic Coverage (DC) | 0 % |
| Operating current | 0 ... 200 mA |
| Output polarity | DC |
| Switching function | Normally open (NO) |
| Reduction factor r304 | 0.6 |
| Sensing face | PBT |
| Output type | PNP |
| Off-state current | 0 ... 0.1 mA |
| Rated operating distance | 8 mm |
| Output type | 3-wire |
| Core cross-section | 0.34 mm2 |
| Hysteresis | typ. 5 % |
| MTTFd | 1140 a |
| Short-circuit protection | pulsing |
| Degree of protection | IP67 |
Comments
No comments yet