Pepperl+Fuchs NBN25-30GM50-E2-V1-M Inductive sensor


Item Number: NBN25-30GM50-E2-V1-M
- 25 mm non-flush
- Extended temperature range
-40 ... +85 В°C - E1-Type approval
- Increased noise immunity 100 V/m
- With increased sealing, protection class
IP68 / IP69K - Highly shock and vibration resistant
- Overview
- Datasheet
- Alternative numbers
- Comments
Surge suppression | yes |
Installation | non-flush |
Sensing face | PBT |
Hysteresis | typ. 5% |
Operating current | 0 ... 200 mA |
No-load supply current | 7 mA |
Reduction factor rCu | 0.45 |
Switching function | Normally open (NO) |
Reduction factor r304 | 0.7 |
Diagnostic Coverage (DC) | 0 % |
Inductive overvoltage protection | yes |
Degree of protection | IP68 / IP69K |
Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
Reduction factor rAl | 0.5 |
Reverse polarity protection | reverse polarity protected |
Operating voltage | 5 ... 60 V |
Switching frequency | 0 ... 200 Hz |
Output polarity | DC |
Mission Time (TM) | 20 a |
E1 Type approval | 10R-04 |
Assured operating distance | 0 ... 20.25 mm |
Mass | 94 g |
Housing material | brass, nickel-plated |
Reduction factor rBrass | 0.5 |
Short-circuit protection | pulsing |
MTTFd | 830.5 a |
Rated insulation voltage | 60 V |
Rated operating distance | 25 mm |
Output type | 3-wire |
Off-state current | 0 ... 0.5 mA typ. 6 andmicro;A at 25 В°C |
EAC conformity | TR CU 020/2011 |
Output type | PNP |
Housing diameter | 30 mm |
Ambient temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
Connection type | Connector M12 x 1 , 3-pin |
CCC approval | Certified by China Compulsory Certification (CCC) |
Switching state indicator | Multihole-LED, yellow |
Voltage drop | 2 V |
People also buy
Comments
No comments yet