Pepperl+Fuchs NBN3-8GS35-E2-V1
Inductive sensor
- Overview
- Comments
Output polarityDC
3 mm non-flush
Increased operating distance
Stainless steel version
Extended temperature range
-40 ... +85 В°C
Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 8 mm x 8 mm x 1 mm |
Connection type | Connector plug M12 x 1 , 4-pin |
Output type | 3-wire |
Ambient temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
Reduction factor rBrass | 0.5 |
CCC approval | CCC approval / marking not required for products rated 36 V |
Reverse polarity protection | reverse polarity protected |
Degree of protection | IP67 |
Voltage drop | 1.5 V |
Reduction factor rAl | 0.5 |
Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
Assured operating distance | 0 ... 2.43 mm |
Hysteresis | typ. 5% |
Operating current | 0 ... 100 mA |
Scope of delivery | 2 hex nuts included |
Switching frequency | 0 ... 4500 Hz |
Short-circuit protection | pulsing |
Housing material | Stainless steel 1.4305 / AISI 303 |
Operating voltage | 5 ... 30 V |
Installation | non-flush |
Mission Time (TM) | 20 a |
Switching state indicator | Multihole-LED, yellow |
No-load supply current | 10 mA |
MTTFd | 960 a |
Off-state current | 0 ... 0.2 mA |
Rated operating distance | 3 mm |
Output type | PNP |
Reduction factor rCu | 0.4 |
Sensing face | LCP |
Diagnostic Coverage (DC) | 0 % |
Switching function | Normally open (NO) |
UL approval | cULus Listed, General Purpose, Class 2 Power Source |
Time delay before availability | 100 ms |
Reduction factor r304 | 0.75 |
Comments
No comments yet