Pepperl+Fuchs NBN3-F25F-E8-Y47291 Inductive sensor
Item Number: NBN3-F25F-E8-Y47291
- Direct mounting on standard actuators
- For installation in housing
- Overview
- Datasheet
- Alternative numbers
- Comments
| Assured operating distance | 0 ... 2.3 mm |
| Tightening torque, fastening screws | M5 x 25 : 2.7 Nm |
| No-load supply current | ≤ 25 mA |
| Switching state indicator | LED, yellow |
| Output type | PNP |
| Degree of protection | IP67 |
| Operating voltage indicator | LED, green |
| Reverse polarity protection | all connections |
| Short-circuit protection | pulsing |
| Note | Installation in housing |
| Sensing face | PBT |
| Output type | 3-wire |
| Core cross-section | 4 x 0.34 mm2 |
| Output polarity | DC |
| Installation | flush mountable |
| Hysteresis | typ. 5 % |
| Off-state current | 0 ... 0.5 mA typ. 0.1 µA at 25 В°C |
| Connection type | cable PVC , 5 m |
| Actual operating distance | 2.6 ... 2.6 mm typ. |
| Operating current | 0 ... 200 mA |
| Time delay before availability | ≤ 500 ms |
| Rated operating distance | 3 mm |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Voltage drop | ≤ 3 V |
| Operating voltage | 10 ... 30 V |
| Switching frequency | 0 ... 500 Hz |
| Reduction factor rAl | 0.5 |
| Reduction factor rSt37 | 1.1 |
| Housing material | PBT |
| Switching function | 2 x normally open (NO) |
| CSA approval | cCSAus Listed, General Purpose |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| UL approval | cULus Listed, General Purpose |
| Reduction factor r304 | 1 |
Comments
No comments yet