Pepperl+Fuchs NBN3-F31K2M-E8-B13-S-3G-3D
Inductive sensor
- Direct mounting on standard actuators
- ATEX-approval for zone 2 and zone 22
- Rugged metal base
- Weatherproof housing for outdoor applications
- Plug-in terminals
Item Number:
NBN3-F31K2M-E8-B13-S-3G-3D
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| No-load supply current | 25 mA |
| Short-circuit protection | no |
| Output polarity | DC |
| MTTFd | 490 a |
| Tightening torque, fastening screws | 2 Nm |
| Tightening torque, housing screws | 1.5 Nm |
| CE marking | [*PD-Z02586A*] |
| Current | max. 240 mA |
| Voltage drop | 3 V |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Switching function | 2 x normally open (NO) |
| Ambient temperature | -40 ... 75 В°C (-40 ... 167 В°F) , restriction for use in hazardous area, see instruction manual |
| Diagnostic Coverage (DC) | 0 % |
| Housing material | rugged polycarbonate (PC) + GF 10% , optimised for outdoor use |
| Operating current | 0 ... 100 mA |
| Switching frequency | 0 ... 100 Hz |
| Assured operating distance | 0 ... 1.5 mm |
| Mission Time (TM) | 20 a |
| Tightening torque, earthing screw | 1.5 Nm |
| Installation | for non-flush mounting |
| Output type | PNP |
| Short-circuit protection | pulsing |
| Standards | EN 60079-0:2012+A11:2013, EN 60079-31:2014 Protection by enclosure ""tc"" Some of the information in this instruction manual is more specific than the information provided in the datasheet. |
| Connection (system side) | M20 x 1.5 cable gland , ground connection with earthing screw only for wire cross-section 4 mm2, use solid wire or stranded wire with wire end ferrule |
| Voltage | max. 32 V DC |
| Degree of protection | IP67 ; additional degree of protection IP66/IP69 with BT65-F31K2-RG-EN-01 and SH-F31K2-B13 |
| Certificate | PF 15CERT3754 X |
| Rated operating distance | 2.5 mm |
| General | The corresponding datasheets, declarations of conformity, EC-type examination certificates, certifications, and control drawings, where applicable (see datasheets), form an integral part of this document. These documents can be found at www.pepperl-fuchs.com. The maximum surface temperature of the device was determined without a layer of dust on the apparatus. Some of the information in this instruction manual is more specific than the information provided in the datasheet. |
| Connection (valve side) | screw terminal , Cable gland M20 x 1.5 |
| Reverse polarity protection | all connections |
| Reverse polarity protection | yes, with reversed output LED is out of function, therfore more power for solenoid valve |
| Tightening torque, stopping plug | 2 Nm |
| Housing base | powder coated aluminum |
| Output type | 4-wire |
| Use in the hazardous area | see instruction manuals |
| ATEX marking | The Ex-related marking can also be printed on the enclosed label. |
| Tightening torque, cable gland | max. 4 Nm |
| CE marking | [*PD-Z02586A*] |
| Hysteresis | typ. 5 % |
| Standards | EN 60079-0:2012+A11:2013, EN 60079-15:2010 Ignition protection category ""n"" Use is restricted to the following stated conditions |
| Off-state current | 0 ... 0.5 mA typ. 0.1 andmicro;A |
| ATEX marking | The Ex-related marking can also be printed on the enclosed label. |
| Operating voltage | 10 ... 30 V |
Comments
No comments yet