Pepperl+Fuchs NBN3-F31K2M-Z8L-B13-S
Inductive sensor
- Direct mounting on standard actuators
- Compatible with all process control systems
- Weatherproof housing for outdoor applications
- Rugged metal base
- Temperature range -40 ... 167 В°F (-40В°C to 75В°C)
- 2-wire DC sensor with minimum off-state current
- LEDs for switching state of sensor and solenoid valve
- Plug-in terminals
Item Number:
NBN3-F31K2M-Z8L-B13-S
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Housing base | powder coated aluminum |
| Operating voltage | 6 ... 30 V |
| Current | max. 240 mA |
| Diagnostic Coverage (DC) | 0 % |
| Rated operating distance | 2.5 mm |
| Installation | for non-flush mounting |
| Operating current | 4 ... 100 mA |
| Output type | 2x 2-wire |
| Voltage drop | 6 V |
| Tightening torque, stopping plug | 1 Nm |
| Voltage | max. 32 V DC |
| Hysteresis | typ. 0.5 mm |
| Output type | Two-wire |
| Output polarity | DC |
| Tightening torque, cable gland | max. 4 Nm |
| Mission Time (TM) | 20 a |
| UL approval | cULus Listed, General Purpose, Class 2 Power Source |
| Short-circuit protection | no |
| Valve status indicator | LED, yellow |
| Assured operating distance | 0 ... 2.05 mm |
| Reverse polarity protection | yes, with reversed output LED is out of function, therfore more power for solenoid valve |
| Switching frequency | 0 ... 100 Hz |
| Short-circuit protection | no |
| Ambient temperature | -40 ... 75 В°C (-40 ... 167 В°F) , restriction for use in hazardous area, see instruction manual |
| Switching state indicator | LED, yellow |
| Housing material | rugged, translucent polycarbonate (PC) optimised for outdoor use |
| MTTFd | 684 a |
| Connection (system side) | screw terminal , M20 x 1.5 cable gland |
| Off-state current | 100 ... 200 andmicro;A typ. 160 andmicro;A |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Switching function | 2 x normally open (NO) |
| Degree of protection | IP66 / IP68 / IP69 |
| Connection (valve side) | screw terminal , Cable gland M20 x 1.5 |
| Reverse polarity protection | reverse polarity tolerant |
| Core cross-section (system side) | 1.5/2.5 mm2 flexible/rigid |
| Tightening torque, housing screws | 2 Nm |
| EAC conformity | TR CU 020/2011 |
Comments
No comments yet