Pepperl+Fuchs NBN30-U4-Z2 Inductive sensor
Item Number: NBN30-U4-Z2
- Sensor head bidirectional and rotatable
- 30 mm non-flush
- 2 LEDs indicator for 360В° visibility
- Overview
- Datasheet
- Alternative numbers
- Comments
| Installation | non-flush |
| Sensing face | PA |
| Reverse polarity protection | reverse polarity tolerant |
| Reduction factor r304 | 0.7 |
| Assured operating distance | 0 ... 24.3 mm |
| Off-state current | 0 ... 0.5 mA |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Short-circuit protection | yes |
| Voltage drop | 5 V |
| Ambient temperature | -25 ... 85 В°C (-13 ... 185 В°F) |
| Switching function | Normally open/closed (NO/NC) |
| Reduction factor rAl | 0.3 |
| Output polarity | DC |
| UL approval | cULus Listed, General Purpose |
| Switching frequency | 0 ... 150 Hz |
| Output type | 2-wire |
| Housing base | metal |
| MTTFd | 1170 a |
| Housing material | PA/metal with epoxy powder coating |
| Operating current | 2 ... 200 mA |
| Operating voltage | 5 ... 60 V |
| Output type | Two-wire |
| Hysteresis | typ. 5 % |
| Core cross-section | up to 2.5 mm2 |
| Reduction factor rCu | 0.3 |
| Actual operating distance | 27 ... 33 mm typ. 30 mm |
| Connection type | screw terminals |
| Degree of protection | IP68 / IP69K |
| Mass | 225 g |
| Switching state indicator | 2 LED, yellow |
| CCC approval | Certified by China Compulsory Certification (CCC) |
| Note | Tightening torque: 1.8 Nm (housing) |
| Rated operating distance | 30 mm |
| Information for connection | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % |
Comments
No comments yet