Pepperl+Fuchs NBN4-F25-2Z4L-V1 Inductive sensor
Item Number: NBN4-F25-2Z4L-V1
- Direct mounting on standard actuators
- Small construction with sturdy plastic housing of protection class IP 67
- 2-wire DC sensor with minimum off-state current
- M12 male connector
- Overview
- Datasheet
- Alternative numbers
- Comments
| Switching function | 2 x normally open (NO) |
| Output type | 2x 2-wire |
| Note | Mounted on mechanical drive |
| Degree of protection | IP67 |
| Mass | 49 g |
| Hysteresis | typ. 5 % |
| Reduction factor r304 | 1 |
| Reduction factor rAl | 0.6 |
| Rated operating distance | 4 mm |
| Off-state current | 120 ... 200 andmicro;A typ. 175 andmicro;A at 25 В°C |
| Assured operating distance | 0 ... 3.24 mm |
| UL approval | cULus Listed |
| Actual operating distance | 3.6 ... 4.4 mm typ. |
| Switching state indicator | LED, yellow |
| Installation | flush mountable |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Operating voltage | 5 ... 30 V DC |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Time delay before availability | 100 ms |
| Reverse polarity protection | reverse polarity protected |
| Reduction factor rSt37 | 1.2 |
| Tightening torque, fastening screws | M5 x 25 : 2.7 Nm |
| Operating current | 4 ... 100 mA |
| Housing material | PBT |
| Short-circuit protection | pulsing |
| Reduction factor rCu | 0.45 |
| Connection type | Connector plug M12 x 1 , 4-pin |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Switching frequency | 0 ... 500 Hz |
| Sensing face | PC |
| Output polarity | DC |
| Connector housing | metal |
| Voltage drop | 4.5 V |
| Output type | Two-wire |
Comments
No comments yet