Pepperl+Fuchs NBN4-F25-E8-0,14M
Inductive sensor
- Direct mounting on standard actuators
- Small construction with sturdy plastic housing of protection class IP 67
- LED for power on
Item Number:
NBN4-F25-E8-0,14M
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Datasheet
- Alternative numbers
- Comments
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Time delay before availability | 100 ms |
| Hysteresis | typ. 5 % |
| Switching frequency | 0 ... 1000 Hz |
| Housing material | PBT |
| Mission Time (TM) | 20 a |
| Output polarity | DC |
| Reduction factor rCu | 0.4 |
| Tightening torque, fastening screws | M5 x 25 : 2.7 Nm |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| UL approval | cULus Listed |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Reduction factor rAl | 0.5 |
| Installation | flush mountable |
| Reduction factor r304 | 1 |
| Degree of protection | IP67 |
| Reduction factor rSt37 | 1.1 |
| Output type | 3-wire |
| Sensing face | PC |
| Mass | 405 g |
| Diagnostic Coverage (DC) | 0 % |
| Switching state indicator | LED, yellow |
| Operating voltage | 10 ... 30 V DC |
| Operating current | 0 ... 200 mA |
| Voltage drop | 2.5 V |
| Actual operating distance | 3.6 ... 4.4 mm typ. |
| MTTFd | 860 a |
| Operating voltage indicator | LED, green |
| Core cross-section | 0.14 mm2 |
| No-load supply current | 22.5 mA |
| Reverse polarity protection | reverse polarity protected |
| Note | Mounted on mechanical drive |
| Short-circuit protection | pulsing |
| Output type | PNP |
| Assured operating distance | 0 ... 3.24 mm |
| Connection type | cable PVC , 180 mm |
| Switching function | 2 x normally open (NO) |
| Off-state current | 0 ... 0.5 mA typ. 0.1 andmicro;A at 25 В°C |
| Rated operating distance | 4 mm |
Comments
No comments yet