Pepperl+Fuchs NBN40-U1L-E2
Inductive sensor
- Sensor head bidirectional and rotatable
- 40 mm non-flush
- 4 LEDs indicator for 360В° visibility
- Overview
- Comments
Off-state current | 0 ... 0.5 mA typ. 0.01 mA |
Operating current | 0 ... 200 mA |
Connection type | screw terminals |
Note | Tightening torque: 1.8 Nm (housing) |
Ambient temperature | -25 ... 85 В°C (-13 ... 185 В°F) |
Operating voltage | 10 ... 30 V DC |
Reduction factor r304 | 0.75 |
Actual operating distance | 36 ... 44 mm |
Reduction factor rBrass | 0.45 |
Mass | 225 g |
UL approval | cULus Listed, General Purpose |
Degree of protection | IP68 / IP69K |
Reverse polarity protection | reverse polarity protected |
Short-circuit protection | pulsing |
Core cross-section | up to 2.5 mm2 |
Time delay before availability | 120 ms |
Mission Time (TM) | 20 a |
Operating voltage indicator | LED, green |
Reduction factor rAl | 0.39 |
CCC approval | CCC approval / marking not required for products rated 36 V |
Output type | PNP |
Voltage drop | 2 V |
Switching frequency | 0 ... 100 Hz |
Reduction factor rCu | 0.37 |
Protection class | II |
Switching function | Normally open (NO) |
MTTFd | 1310 a |
Assured operating distance | 0 ... 32.4 mm |
Diagnostic Coverage (DC) | 0 % |
Information for connection | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % |
Hysteresis | typ. 5 % |
Sensing face | PA |
Installation | non-flush |
No-load supply current | 20 mA |
Housing material | PA/metal |
Rated operating distance | 40 mm |
Output polarity | DC |
Switching state indicator | LED, yellow |
Output type | 3-wire |
Housing base | plastic |
People also buy
Comments
No comments yet