Pepperl+Fuchs NBN8-18GM50-E2-T-V1 Inductive sensor

Pepperl+Fuchs NBN8-18GM50-E2-T-V1
Item Number: NBN8-18GM50-E2-T-V1
Series: Cylindrical type, Housing diameter: 18 mm, Housing material: brass, nickel-plated, Rated operating distance: 8 mm, Connection type: Connector M12 x 1 , 3-pin, Output type: 3-wire, Installation: non-flush, Type of voltage: DC
Price on Request
Quantity
-
+
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
General specifications
Switching element functionPNP NO
Rated operating distance8 mm
Installationnon-flush
Output polarityDC
Assured operating distance0 ... 6.48 mm
Actuating elementmild steel, e. g. 1.0037, SR235JR (formerly St37-2)
24 mm x 24 mm x 1 mm
Reduction factor rAl 0.4
Reduction factor rCu 0.3
Reduction factor r304 0.7
Reduction factor rBrass 0.4
Nominal ratings
Installation conditions
A15 mm
B20 mm
C15 mm
F28 mm
Operating voltage10 ... 30 V
Switching frequency0 ... 300 Hz
Hysteresis0.04 ... 1.76 mm
Reverse polarity protectionyes
Short-circuit protectionyes
Overload resistanceyes
Wire breakage protectionyes
Inductive overvoltage protectionyes
Ripple10 %
Voltage dropless than or equal to 2.5 V
Repeat accuracy0.2 mm
Operating current0 ... 200 mA
Off-state current0 ... 0.5 mA typ. 0.1 mA at 25 °C
No-load supply currentless than or equal to 7 mA
Switching state indicatorMultihole-LED, yellow
Functional safety related parameters
MTTFd1935 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Approvals and certificates
CCC approvalCCC approval / marking not required for products rated less than or equal to 36 V
Ambient conditions
Ambient temperature-25 ... 100 °C (-13 ... 212 °F)
Storage temperature-40 ... 100 °C (-40 ... 212 °F)
Mechanical specifications
Connection typeConnector M12 x 1 , 3-pin
Housing materialbrass, nickel-plated
Sensing facePBT
Housing diameter18 mm
Degree of protectionIP67
Mass50 g

Comments

No comments yet

Write a comment

in international format without spaces
All fields are required