Pepperl+Fuchs NBN8-18GM60-WS-V12
Inductive sensor
- 8 mm non-flush
- 2-wire AC
- Overview
- Comments
Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
Mission Time (TM) | 20 a |
Reduction factor rCu | 0.4 |
Sensing face | PBT |
MTTFd | 1103 a |
Degree of protection | IP67 |
Rated operating distance | 8 mm |
Output type | Two-wire |
Momentary current (20 ms, 0.1 Hz) | 0 ... 1600 mA |
Diagnostic Coverage (DC) | 0 % |
Reverse polarity protection | reverse polarity tolerant |
CSA approval | cCSAus Listed, General Purpose |
CCC approval | Certified by China Compulsory Certification (CCC) |
Operating voltage indicator | LED, green |
UL approval | cULus Listed, General Purpose |
Switching state indicator | LED, yellow |
Voltage drop | < 5 V (IL > 50 mA); < 8 V (IL < 50 mA) |
Note | 1) In the temperature range below 0 В°C, permissible operating voltage Ub 80...253 V Safety fuse ≤ 0.8 A (quick-blow) according to IEC 60127-2 Sheet 1 Recommendation: after a short circuit, check that the device is functioning correctly. |
Hysteresis | typ. 7.5 % |
Connection type | Connector plug 1/2""-20 UN , 3-pin |
Off-state current | 0 ... 1.7 mA typ. |
Installation | non-flush |
Actual operating distance | 7.2 ... 8.8 mm typ. 8 mm |
Reduction factor rAl | 0.4 |
Reduction factor r304 | 0.7 |
Operating voltage | 20 ... 253 V |
Assured operating distance | 0 ... 6.48 mm |
Switching function | Normally open (NO) |
Operating current | 5 ... 200 mA |
Housing material | brass, nickel-plated |
Switching frequency | 0 ... 20 Hz |
Time delay before availability | ≤ 30 ms |
Output type | 2-wire |
Output polarity | AC |
People also buy
Comments
No comments yet