Pepperl+Fuchs NCB1,5-12M35-N0-V1-Y125502

Inductive sensor

Appropriate typeNCB1,5...M...N0...NAMUR sensors must be operated with approved switch amplifiers.

CE marking	[*PD-Z02585A*]
Standards	EN 60079-0:2012+A11:2013, EN 60079-11:2012 Ignition protection ""Intrinsic safety"" Use is restricted to the following stated conditions
Ambient temperature	-25 ... 100 В°C (-13 ... 212 В°F)
Appropriate type	NCB1,5...M...N0...
CSA approval	cCSAus Listed, General Purpose
Effective internal inductance	max. 100 µH ; a cable length of 10 m is considered.
Reduction factor rCu	0.3
Output type	2-wire
Effective internal capacitance	max. 90 µF A cable length of 10 m is considered.
Switching function	Normally closed (NC)
Effective internal inductance	max. 100 µH A cable length of 10 m is considered.
ATEX marking	II 1D Ex ia IIIC T135В°C Da The Ex-related marking can also be printed on the enclosed label.
Switching frequency	0 ... 2000 Hz
Installation	flush
Use in the hazardous area	see instruction manuals
Nominal voltage	8 V
Reduction factor rAl	0.4
ATEX marking	II 2G Ex ia IIC T6…T1 Gb The Ex-related marking can also be printed on the enclosed label.
Sensing face	PBT
Housing material	Stainless steel 1.4305 / AISI 303
Effective internal capacitance	max. 90 nF ; a cable length of 10 m is considered.
Rated operating distance	1.5 mm
Maximum permissible ambient temperature	Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the temperature class, and the effective internal reactance values can be found on the EU-type examination certificate.
Output type	NAMUR
Degree of protection	IP67
UL approval	cULus Listed, General Purpose
Connection type	Connector plug M12 x 1 , 4-pin
Reduction factor r304	0.85
Standards	EN 60079-0:2012+A11:2013, EN 60079-11:2012 Ignition protection ""Intrinsic safety"" Use is restricted to the following stated conditions
CE marking	[*PD-Z02585A*]
Assured operating distance	0 ... 1.21 mm