Pepperl+Fuchs NCB5-18GM40-N0-15M
Inductive sensor
We ship to United States of America!
- Comfort series
Item Number:
NCB5-18GM40-N0-15M
Delivery standard: 3-6 weeks, depending on the country.
Condition: new
The price and delivery terms is not final. Please check with the manager.
Contact our experts
- Overview +
- Comments +
| ATEX marking | The Ex-significant identification is on the enclosed adhesive label |
| Nominal voltage | 8 V |
| ATEX marking | The Ex-related marking can also be printed on the enclosed label. |
| Effective internal inductance Li | max. 100 andmicro;H ; A cable length of 10 m is considered. |
| Standards | EN 60079-0:2012+A11:2013 EN 60079-11:2012 Ignition protection ""Intrinsic safety"" Use is restricted to the following stated conditions |
| Effective internal inductance | max. 100 andmicro;H ; a cable length of 10 m is considered. |
| Sensing face | PBT |
| General | The apparatus has to be operated according to the appropriate data in the data sheet and in this instruction manual. The data stated in the data sheet are restricted by this operating instruction! The special conditions must be observed! The ATEX Directive applies only to the use of apparatus under atmospheric conditions. If you use the device outside atmospheric conditions, consider that the permissible safety parameters should be reduced. |
| Switching state indicator | all direction LED, yellow |
| Reverse polarity protection | reverse polarity protected |
| EAC conformity | TR CU 012/2011 |
| Rated operating distance | 5 mm |
| Reduction factor r304 | 0.74 |
| Ambient temperature | Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the temperature class, and the effective internal reactance values can be found on the EC-type examination certificate. Note: Use the temperature table for category 1 !!! The 20 % reduction in accordance with EN 1127-1 has already been applied to the temperature table for category 1. |
| CE marking | [*PD-Z02586A*] |
| ATEX marking | |
| MTTFd | 2040 a |
| Appropriate type | NCB5-18GM...-N0... |
| Effective internal capacitance | max. 95 nF ; a cable length of 10 m is considered. |
| ATEX marking | The Ex-significant identification is on the enclosed adhesive label |
| Appropriate type | NCB5-18GM...-N0... |
| CSA approval | cCSAus Listed, General Purpose |
| Ambient temperature | -25 ... 100 ?°C (-13 ... 212 ?°F) |
| Hysteresis | 1 ... 15 typ. 5 % |
| CE marking | [*PD-Z02585A*] |
| Output type | NAMUR |
| Maximum permissible ambient temperature | Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the surface temperature, and the effective internal reactance values can be found on the EC-type-examination certificate. The maximum permissible ambient temperature of the data sheet must be noted, in addition, the lower of the two values must be maintained. |
| ATEX marking | |
| Assured operating distance | 0 ... 4.05 mm |
| Switching function | Normally closed (NC) |
| Effective internal inductance | max. 100 andmicro;H ; a cable length of 10 m is considered. |
| ATEX marking | The Ex-significant identification is on the enclosed adhesive label |
| Output type | 2-wire |
| UL approval | cULus Listed, General Purpose |
| Standards | EN 60079-0:2012+A11:2013, EN 60079-31:2014 Protection by enclosure ""tc"" Some of the information in this instruction manual is more specific than the information provided in the datasheet. |
| Standards | EN 50281-1-1 Protection via housing Use is restricted to the following stated conditions |
| Maximum permissible ambient temperature | Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the temperature class, and the effective internal reactance values can be found on the EC-type examination certificate. |
| Standard conformity | EN 60079-15:2005 Ignition protection category ""n"" Use is restricted to the following stated conditions |
| Degree of protection | IP67 |
| Mission Time (TM) | 20 a |
| Installation | flush |
| Reduction factor rAl | 0.35 |
| Certificate | PF 13 CERT 2895 X |
| CE marking | [*PD-Z02585A*] |
| Effective internal capacitance | max. 95 nF ; a cable length of 10 m is considered. |
| Effective internal capacitance | max. 95 nF ; a cable length of 10 m is considered. |
| Effective internal capacitance Ci | max. 95 nF ; a cable length of 10 m is considered. |
| Reduction factor rCu | 0.3 |
| Appropriate type | NCB5-18GM...-N0... |
| Effective internal inductance | max. 100 andmicro;H ; A cable length of 10 m is considered. |
| Use in the hazardous area | see instruction manuals |
| CE marking | [*PD-Z02585A*] |
| Switching frequency | 0 ... 400 Hz |
| Connection type | cable PVC , 15 m |
| Short-circuit protection | yes |
| Standards | EN 60079-0:2012+A11:2013 EN 60079-11:2012 Ignition protection category ""ic"" Use is restricted to the following stated conditions |
| General | The corresponding datasheets, declarations of conformity, EC-type examination certificates, certifications, and control drawings, where applicable (see datasheets), form an integral part of this document. These documents can be found at www.pepperl-fuchs.com. The maximum surface temperature of the device was determined without a layer of dust on the apparatus. Some of the information in this instruction manual is more specific than the information provided in the datasheet. |
| CE marking | [*PD-Z02585A*] |
| Storage temperature | -40 ... 100 ?°C (-40 ... 212 ?°F) |
| Actual operating distance | 4.5 ... 5.5 mm typ. 5 mm |
| Effective internal inductance | max. 100 andmicro;H ; a cable length of 10 m is considered. |
| Diagnostic Coverage (DC) | 0 % |
| Core cross-section | 0.75 mm2 |
| Standards | EN 60079-0:2012+A11:2013 EN 60079-11:2012 Ignition protection ""Intrinsic safety"" Use is restricted to the following stated conditions |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Standards | EN 60079-0:2012+A11:2013 EN 60079-11:2012 Ignition protection ""Intrinsic safety"" Use is restricted to the following stated conditions |
| Effective internal capacitance | max. 95 nF ; a cable length of 10 m is considered. |
| CE marking | [*PD-Z02585A*] |
Buy Pepperl+Fuchs NCB5-18GM40-N0-15M with the best possible price and delivery terms on eltra-trade.com
Eltra Trade s.r.o. is a global leader in industrial automation supply. Our extensive catalog includes top brands, with worldwide delivery and competitive pricing. We focus on customer satisfaction and reliability. Experience our exceptional service and support for all your automation needs.
Comments
No comments yet