Pepperl+Fuchs NCN25-F35-A2-250-15M-V1 Inductive sensor

Pepperl+Fuchs NCN25-F35-A2-250-15M-V1
Item Number: NCN25-F35-A2-250-15M-V1
Series: Rectangular type, Housing material: PTFE / Al / 1.4305 / AISI 303, Rated operating distance: 25 mm, Connection type: Connector M12 x 1 , 4-pin, Output type: 4-wire, Installation: flush mountable, Type of voltage: DC
Price on Request
Quantity
-
+
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
General specifications
Switching element functionPNP NO/NC
Rated operating distance25 mm
Installationflush mountable
Output polarityDC
Assured operating distance0 ... 20 mm
Reduction factor rAl 0.5
Reduction factor rCu 0.5
Reduction factor r304 0.6 ... 1
Mounting angleAl
Amplifier housingStainless steel
Nominal ratings
Operating voltage10 ... 30 V
Switching frequency0 ... 20 Hz
Hysteresis0.3 ... 5 typ. 2 %
Reverse polarity protectionreverse polarity protected
Short-circuit protectionpulsing
Voltage dropless than or equal to 3 V
Operating current0 ... 200 mA
No-load supply currentless than or equal to 25 mA
Switching state indicatorMultihole-LED, yellow
Functional safety related parameters
MTTFd7515 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Approvals and certificates
UL approvalcULus Listed, General Purpose, Class 2 Power Source
CCC approvalCCC approval / marking not required for products rated less than or equal to 36 V
Ambient conditions
Ambient temperature0 ... 250 °C (32 ... 482 °F)
Mechanical specifications
Connection typeConnector M12 x 1 , 4-pin
Cable versionPFA cable, with armour of stainless steel
Core cross-section3 x 0.34 , screened
Housing materialPTFE / Al / 1.4305 / AISI 303
Sensing facePTFE
Degree of protectionamplifier IP67
sensor IP40
Note- amplifier 0 °C ... 70 °C
- r1.4305 dep. on thickness of measurement plate d:
r1.4305 = 1 for d < 1mm
Additional accessory: Protective cover SH-F35 is available for use in areas where there is moisture and as a means of mechanical protection.

Comments

No comments yet

Write a comment

in international format without spaces
All fields are required