Pepperl+Fuchs NCN3-F31K-N4-K-Y244381
Inductive sensor
We ship to United States of America!
- Direct mounting on standard actuators
- Fixed setting
- EC-Type Examination Certificate TГњV99 ATEX 1479X
- Usable up to SIL 2 acc. to IEC 61508
- LEDs for switching state of sensor and solenoid valve
- Valve LEDs disconnectable
Item Number:
NCN3-F31K-N4-K-Y244381
Delivery standard: 3-6 weeks, depending on the country.
Condition: new
Contact our experts
- Overview +
- Comments +
| Effective internal capacitance | max. 100 nF The value is applicable for one sensor circuit. A cable length of 10 m is considered. |
| Reduction factor rCu | 0.4 |
| Maximum permissible ambient temperature | Also observe the maximum permissible ambient temperature stated in the general technical data. Keep to the lower of the two values. |
| CE marking | [*PD-Z02585A*] |
| Effective internal capacitance | max. 100 nF The value is applicable for one sensor circuit. A cable length of 10 m is considered. |
| Core cross-section (valve side) | 1.5/2.5 mm2 flexible/rigid |
| Safety Integrity Level (SIL) | SIL 2 |
| Reverse polarity protection | yes, with reversed output LED is out of function, therfore more power for solenoid valve |
| Maximum values of the valve circuit | The value applies to each valve circuit. A cable length of 10 m is considered. |
| Reduction factor rAl | 0.5 |
| CE marking | [*PD-Z02586A*] |
| Short-circuit protection | yes |
| Tightening torque, housing screws | 1 Nm |
| Output type | 2-wire |
| Short-circuit protection | no |
| Rated operating distance | 3 mm |
| EAC conformity | TR CU 012/2011 |
| Maximum values of the valve circuit | The value applies to each valve circuit. A cable length of 10 m is considered. |
| Maximum values of the valve circuit | The value applies to each valve circuit. A cable length of 10 m is considered. |
| Type of protection | intrinsic safety |
| Tightening torque, cable gland | M20 x 1.5 ; max. 7 Nm M12 x 1.5 ; max. 1.5 Nm |
| Effective internal capacitance | max. 100 nF The value is applicable for one sensor circuit. A cable length of 10 m is considered. |
| Switching function | 2 x normally closed (NC) |
| Reduction factor rSt37 | 1.3 |
| Maximum values of the valve circuit | The value applies to each valve circuit. A cable length of 10 m is considered. |
| Degree of protection | IP67 |
| Effective internal inductance | max. 100 µH The value is applicable for one sensor circuit. A cable length of 10 m is considered. |
| Connection (system side) | Cage tension spring terminals |
| Storage temperature | -40 ... 100 В°C (-40 ... 212 В°F) |
| Housing material | PBT |
| MTTFd | 1470 a |
| Reverse polarity protection | reverse polarity protected |
| Type of protection | intrinsic safety |
| Switching frequency | 0 ... 3 kHz |
| Reduction factor rBrass | 0.6 |
| Type of protection | intrinsic safety |
| Equipment protection level | Ga , Gb , Gc (ic) , Mb |
| Nominal voltage | 8.2 V (Ri approx. 1 kΩ) |
| Ambient temperature | -25 ... 100 В°C (-13 ... 212 В°F) |
| Current | max. 240 mA |
| Reduction factor r304 | 1 |
| Maximum permissible ambient temperature | Also observe the maximum permissible ambient temperature stated in the general technical data. Keep to the lower of the two values. at Ui = 15 V , Ii = 25 mA , Pi = 34 mW , T6 : 70 В°C (158 В°F) T5 : 85 В°C (185 В°F) T4 : 100 В°C (212 В°F) T3 : 100 В°C (212 В°F) T2 : 100 В°C (212 В°F) T1 : 100 В°C (212 В°F) at Ui = 15 V , Ii = 25 mA , Pi = 64 mW , T6 : 70 В°C (158 В°F) T5 : 85 В°C (185 В°F) T4 : 100 В°C (212 В°F) T3 : 100 В°C (212 В°F) T2 : 100 В°C (212 В°F) T1 : 100 В°C (212 В°F) at Ui = 15 V , Ii = 52 mA , Pi = 169 mW , T6 : 65 В°C (149 В°F) T5 : 80 В°C (176 В°F) T4 : 90 В°C (194 В°F) T3 : 90 В°C (194 В°F) T2 : 90 В°C (194 В°F) T1 : 90 В°C (194 В°F) |
| Assured operating distance | 0 ... 2.4 mm |
| Time delay before availability | ≤ 1.1 ms |
| Voltage | max. 32 V DC |
| Core cross-section (system side) | 1.5/2.5 mm2 flexible/rigid |
| Actual operating distance | 2.7 ... 3.3 mm typ. |
| Use in the hazardous area | see instruction manuals |
| CE marking | [*PD-Z02585A*] |
| UL approval | cULus Listed, General Purpose |
| Effective internal inductance | max. 100 µH The value is applicable for one sensor circuit. A cable length of 10 m is considered. |
| Mission Time (TM) | 20 a |
| Valve status indicator | LED, yellow |
| Installation | flush mountable |
| Effective internal inductance | max. 100 µH The value is applicable for one sensor circuit. A cable length of 10 m is considered. |
| CSA approval | cCSAus Listed, General Purpose |
| Switching state indicator | LED, yellow |
| Type of protection | intrinsic safety |
| Note | LED switch-off |
| Sensing face | PBT |
| Maximum permissible ambient temperature | Also observe the maximum permissible ambient temperature stated in the general technical data. Keep to the lower of the two values. at Ui = 20 V , Ii = 25 mA , Pi = 34 mW , T6 : 70 В°C (158 В°F) T5 : 85 В°C (185 В°F) T4 : 100 В°C (212 В°F) T3 : 100 В°C (212 В°F) T2 : 100 В°C (212 В°F) T1 : 100 В°C (212 В°F) at Ui = 20 V , Ii = 25 mA , Pi = 64 mW , T6 : 70 В°C (158 В°F) T5 : 85 В°C (185 В°F) T4 : 100 В°C (212 В°F) T3 : 100 В°C (212 В°F) T2 : 100 В°C (212 В°F) T1 : 100 В°C (212 В°F) at Ui = 20 V , Ii = 52 mA , Pi = 169 mW , T6 : 65 В°C (149 В°F) T5 : 80 В°C (176 В°F) T4 : 90 В°C (194 В°F) T3 : 90 В°C (194 В°F) T2 : 90 В°C (194 В°F) T1 : 90 В°C (194 В°F) |
| Actuating element | Stainless steel 1.4305 / AISI 303 8.5 mm x 8.5 mm x 0.5 mm |
| Suitable for 2:1 technology | yes , Reverse polarity protection diode not required |
| Connection (valve side) | Cage tension spring terminals |
| Output type | NAMUR |
| Scope of delivery | Cable gland , Polyamide (PA) clamping range: 6 ... 7,5 mm/ 7,5 ... 12 mm M20 x 1.5 thread thread length 10 mm seal: Chloropren |
| Effective internal capacitance | max. 100 nF The value is applicable for one sensor circuit. A cable length of 10 m is considered. |
| CE marking | [*PD-Z02585A*] |
| Hysteresis | typ. 5 % |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Effective internal inductance | max. 100 µH The value is applicable for one sensor circuit. A cable length of 10 m is considered. |
| Maximum permissible ambient temperature | Also observe the maximum permissible ambient temperature stated in the general technical data. Keep to the lower of the two values. at Ui = 15 V , Ii = 25 mA , Pi = 34 mW : 100 В°C (212 В°F) at Ui = 15 V , Ii = 25 mA , Pi = 64 mW : 100 В°C (212 В°F) at Ui = 15 V , Ii = 52 mA , Pi = 169 mW : 90 В°C (194 В°F) |
| Diagnostic Coverage (DC) | 0 % |
Buy Pepperl+Fuchs NCN3-F31K-N4-K-Y244381 with the best possible price and delivery terms on eltra-trade.com
Eltra Trade s.r.o. offers premium industrial control products. Our vast inventory and express delivery options ensure you receive your order quickly. We prioritize quality and customer satisfaction. Contact us today to learn more about our offerings and how we can assist your business.
Comments
No comments yet