Pepperl+Fuchs NCN3-F31K2-N4-B13-S
Inductive sensor
- Direct mounting on standard actuators
- ATEX IECEX certifications
- Usable up to SIL 2 acc. to IEC 61508
- Weatherproof housing for outdoor applications
- LEDs for switching state of sensor and solenoid valve
- Plug-in terminals
- Temperature range
-40 ... 100 В°C (-40 ... 212 В°F)
Item Number:
NCN3-F31K2-N4-B13-S
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Switching state indicator | LED, yellow |
| Maximum permissible ambient temperature | Also observe the maximum permissible ambient temperature stated in the general technical data. Keep to the lower of the two values. at Ui = 20 V , Ii = 25 mA , Pi = 34 mW , T6 : 70 В°C (158 В°F) T5 : 85 В°C (185 В°F) T4 : 100 В°C (212 В°F) T3 : 100 В°C (212 В°F) T2 : 100 В°C (212 В°F) T1 : 100 В°C (212 В°F) at Ui = 20 V , Ii = 25 mA , Pi = 64 mW , T6 : 70 В°C (158 В°F) T5 : 85 В°C (185 В°F) T4 : 100 В°C (212 В°F) T3 : 100 В°C (212 В°F) T2 : 100 В°C (212 В°F) T1 : 100 В°C (212 В°F) at Ui = 20 V , Ii = 52 mA , Pi = 169 mW , T6 : 60 В°C (140 В°F) T5 : 75 В°C (167 В°F) T4 : 75 В°C (167 В°F) T3 : 75 В°C (167 В°F) T2 : 75 В°C (167 В°F) T1 : 75 В°C (167 В°F) |
| Maximum permissible ambient temperature | Also observe the maximum permissible ambient temperature stated in the general technical data. Keep to the lower of the two values. at Ui = 15 V , Ii = 25 mA , Pi = 34 mW : 100 В°C (212 В°F) at Ui = 15 V , Ii = 25 mA , Pi = 64 mW : 100 В°C (212 В°F) at Ui = 15 V , Ii = 52 mA , Pi = 169 mW : 75 В°C (167 В°F) |
| Switching function | 2 x normally closed (NC) |
| Time delay before availability | 1 ms |
| UL approval | cULus Listed, General Purpose, Class 2 Power Source |
| Effective internal inductance | max. 100 andmicro;H The value is applicable for one sensor circuit. A cable length of 10 m is considered. |
| Reverse polarity protection | yes, with reversed output LED is out of function, therfore more power for solenoid valve |
| Connection (system side) | Screw terminals, tightening torque min. 0.5 Nm Stripped length 7 mm , M20 x 1.5 |
| Hysteresis | typ. 5 % |
| Current | max. 240 mA |
| Rated operating distance | 3 mm |
| Type of protection | intrinsic safety |
| Effective internal inductance | max. 100 andmicro;H The value is applicable for one sensor circuit. A cable length of 10 m is considered. |
| Effective internal inductance | max. 100 andmicro;H The value is applicable for one sensor circuit. A cable length of 10 m is considered. negligibly small |
| Use in the hazardous area | see instruction manuals |
| Degree of protection | IP66 / IP68 / IP69 |
| Storage temperature | -40 ... 100 В°C (-40 ... 212 В°F) |
| Reduction factor rBrass | 0.5 |
| Diagnostic Coverage (DC) | 0 % |
| Equipment protection level | Ga , Gb , Gc (ic) , Mb |
| Short-circuit protection | no |
| Maximum permissible ambient temperature | Also observe the maximum permissible ambient temperature stated in the general technical data. Keep to the lower of the two values. at Ui = 15 V , Ii = 25 mA , Pi = 34 mW , T6 : 70 В°C (158 В°F) T5 : 85 В°C (185 В°F) T4 : 100 В°C (212 В°F) T3 : 100 В°C (212 В°F) T2 : 100 В°C (212 В°F) T1 : 100 В°C (212 В°F) at Ui = 15 V , Ii = 25 mA , Pi = 64 mW , T6 : 70 В°C (158 В°F) T5 : 85 В°C (185 В°F) T4 : 100 В°C (212 В°F) T3 : 100 В°C (212 В°F) T2 : 100 В°C (212 В°F) T1 : 100 В°C (212 В°F) at Ui = 15 V , Ii = 52 mA , Pi = 169 mW , T6 : 60 В°C (140 В°F) T5 : 75 В°C (167 В°F) T4 : 75 В°C (167 В°F) T3 : 75 В°C (167 В°F) T2 : 75 В°C (167 В°F) T1 : 75 В°C (167 В°F) |
| MTTFd | 1730 a |
| CE marking | [*PD-Z02585A*] |
| Maximum values of the valve circuit | The value applies to each valve circuit. A cable length of 10 m is considered. |
| Reduction factor r304 | 0.7 |
| Type of protection | intrinsic safety |
| Output type | 2-wire |
| Reduction factor rCu | 0.4 |
| Actual operating distance | 2.7 ... 3.3 mm typ. |
| Connection (valve side) | like connection (system side) |
| Output type | NAMUR |
| Maximum values of the valve circuit | The value applies to each valve circuit. A cable length of 10 m is considered. |
| CE marking | [*PD-Z02586A*] |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Type of protection | intrinsic safety |
| Effective internal capacitance | max. 100 nF The value is applicable for one sensor circuit. A cable length of 10 m is considered. |
| CE marking | [*PD-Z02585A*] |
| Core cross-section (valve side) | like core cross section (system side) |
| Note | LED switch-off |
| Mission Time (TM) | 20 a |
| Voltage | max. 32 V DC |
| Effective internal capacitance | max. 100 nF The value is applicable for one sensor circuit. A cable length of 10 m is considered. |
| Tightening torque, cable gland | M20 x 1.5 ; max. 4 Nm |
| Effective internal capacitance | max. 100 nF The value is applicable for one sensor circuit. A cable length of 10 m is considered. |
| Short-circuit protection | yes |
| Housing base | PC |
| Tightening torque, housing screws | 2 Nm |
| Effective internal capacitance | max. 100 nF The value is applicable for one sensor circuit. A cable length of 10 m is considered. |
| Maximum permissible ambient temperature | Also observe the maximum permissible ambient temperature stated in the general technical data. Keep to the lower of the two values. |
| Valve status indicator | LED, yellow |
| Effective internal inductance | max. 100 andmicro;H The value is applicable for one sensor circuit. A cable length of 10 m is considered. |
| Maximum values of the valve circuit | The value applies to each valve circuit. A cable length of 10 m is considered. |
| Core cross-section (system side) | rigid: 0.14 ... 2.5 mm2 flexible: 0.14 ... 1.5 mm2 flexible with core-end sleeve: 0.25 ... 1.5 mm2 |
| Installation | flush mountable |
| Reverse polarity protection | reverse polarity protected |
| CE marking | [*PD-Z02585A*] |
| Assured operating distance | 0 ... 2.4 mm For assured operating distance sar see Manual Functional Safety. |
| Housing material | rugged, translucent polycarbonate (PC) optimised for outdoor use |
| Type of protection | intrinsic safety |
| Tightening torque, stopping plug | 1 Nm |
| Switching frequency | 0 ... 3 kHz |
| Reduction factor rSt37 | 1 |
| Nominal voltage | 8 V |
| Maximum values of the valve circuit | The value applies to each valve circuit. A cable length of 10 m is considered. |
| Suitable for 2:1 technology | yes , Reverse polarity protection diode not required |
| Ambient temperature | -40 ... 100 В°C (-40 ... 212 В°F) |
| Actuating element | Stainless steel 1.4305 / AISI 303 8.5 mm x 8.5 mm x 0.5 mm |
| Reduction factor rAl | 0.4 |
| Safety Integrity Level (SIL) | SIL 2 |
Comments
No comments yet