Pepperl+Fuchs NDP-KE2-8E2-FP
WIS module primary
- 8 channels
- 9 outputs
- LEDs for display of the output states and communication
- Deactivation option
- Housing with removable terminals
- DIN rail mounting
- For connection of 1 transmitter head
- Can only be used in conjunction with NDP20-FP series WIS transmitter
- Overview
- Comments
Input type | Activation input signal level: 15 V = active, 3 V inactive |
Ambient temperature | 0 ... 50 В°C (32 ... 122 В°F) |
Number of signal channels | 8 |
Transfer indicator | LED, green |
Degree of protection | IP20 |
Storage temperature | -25 ... 85 В°C (-13 ... 185 В°F) |
Number | 1 |
Signal transfer direction | from secondary side to primary side |
Voltage drop | 2.5 V |
Diagnostic Coverage (DC) | 0 % |
Output type | 1 Status output (high with proper transfer) and 8 Switch outputs PNP, NO. (switched high) , overload and short-circuit resistant |
Input current | 1 mA |
MTTFd | 245 a |
Mass | 106 g |
Response time | 200 ms ( static operation , the transmission heads stand opposite to each other ) |
Internal resistor | 15 kandOmega; |
Mission Time (TM) | 20 a |
Operating voltage | 24 V DC В± 10 % |
Load current | max. 50 mA |
Reverse polarity protection | reverse polarity protected |
Note | Maximum cable length between WIS module and WIS transmitter must not exceed 5 m. |
Installation | DIN rail mounting |
Current consumption | max. 1000 mA |
CCC approval | CCC approval / marking not required for products rated 36 V |
Switching state | 8 x LED, yellow |
People also buy
Comments
No comments yet