Pepperl+Fuchs NEB12-18GM50-E2-5M
Inductive sensor
- Increased operating distance
- 12 mm quasi flush
- Overview
- Comments
Sensing face | PBT |
No-load supply current | 11 mA |
Assured operating distance | 0 ... 9.72 mm |
Operating voltage | 10 ... 30 V |
Reduction factor rCu | 0.2 |
Switching state indicator | LED, yellow |
Operating current | 0 ... 200 mA |
Rated operating distance | 12 mm |
Reduction factor rBrass | 0.33 |
Wire breakage protection | yes |
Diagnostic Coverage (DC) | 0 % |
Installation | quasi flush |
Mass | 100 g |
MTTFd | 2650 a |
EAC conformity | TR CU 020/2011 |
Degree of protection | IP67 |
Voltage drop | 2 V |
Connection type | cable PUR , 5 m |
Housing diameter | 18 mm |
Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 36 mm x 36 mm x 1 mm |
Off-state current | 10 andmicro;A |
Switching function | Normally open (NO) |
Reverse polarity protection | yes |
Ambient temperature | -25 ... 85 В°C (-13 ... 185 В°F) |
Housing material | brass, nickel-plated |
UL approval | cULus Listed, General Purpose |
Core cross-section | 0.34 mm2 |
Repeat accuracy | 0.6 mm |
Reduction factor r304 | 0.63 |
Inductive overvoltage protection | yes |
Surge suppression | yes |
Short-circuit protection | pulsing |
Output polarity | DC |
Hysteresis | 0.12 ... 1.8 mm |
Switching frequency | 0 ... 500 Hz |
Reduction factor rAl | 0.26 |
Overload resistance | yes |
Ripple | 10 % |
CCC approval | CCC approval / marking not required for products rated 36 V |
Output type | PNP |
Mission Time (TM) | 20 a |
People also buy
Comments
No comments yet