Pepperl+Fuchs NEB3-6,5M45-E2-V3 Inductive sensor


Item Number: NEB3-6,5M45-E2-V3
- Increased operating distance
- 3 mm quasi flush
- Extended temperature range
-40 ... +85 В°C
- Overview
- Datasheet
- Alternative numbers
- Comments
Switching state indicator | Multihole-LED, yellow |
Installation | quasi flush |
Switching function | Normally open (NO) |
Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
Reduction factor r304 | 0.7 |
UL approval | cULus Listed, General Purpose |
No-load supply current | 10 mA |
Output polarity | DC |
Voltage drop | 1.5 V |
Ambient temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
Hysteresis | typ. 5% |
CCC approval | CCC approval / marking not required for products rated 36 V |
Operating current | 0 ... 100 mA |
Time delay before availability | 100 ms |
Rated operating distance | 3 mm |
Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 9 mm x 9 mm x 1 mm |
Output type | PNP |
Reverse polarity protection | reverse polarity protected |
Short-circuit protection | pulsing |
Sensing face | LCP |
Assured operating distance | 0 ... 2.43 mm |
Mission Time (TM) | 20 a |
Reduction factor rAl | 0.4 |
MTTFd | 960 a |
Reduction factor rCu | 0.3 |
Degree of protection | IP67 |
Operating voltage | 5 ... 30 V |
Reduction factor rBrass | 0.45 |
Switching frequency | 0 ... 3500 Hz |
Off-state current | 0 ... 0.2 mA |
Mass | 8 g |
Diagnostic Coverage (DC) | 0 % |
Connection type | Connector plug M8 x 1 , 3-pin |
Output type | 3-wire |
Housing material | brass, nickel-plated |
People also buy
Comments
No comments yet