Pepperl+Fuchs NEB3-F41-E2-PUR Inductive sensor
Item Number: NEB3-F41-E2-PUR
- 3-wire DC
- Metal housing
- 3 mm quasi flush
- Overview
- Datasheet
- Alternative numbers
- Comments
| Diagnostic Coverage (DC) | 0 % |
| Hysteresis | 2 ... 20 typ. 10 % |
| Switching state indicator | LED, yellow |
| Sensing face | PBT |
| Assured operating distance | 0 ... 2.4 mm |
| Housing material | brass, nickel-plated |
| Degree of protection | IP67 |
| Rated operating distance | 3 mm |
| Time delay before availability | ≤ 50 ms |
| Operating voltage | 10 ... 30 V DC |
| Repeat accuracy | 0.15 mm |
| MTTFd | 2134 a |
| Wire breakage protection | yes |
| Reduction factor rAl | 0.35 |
| Reverse polarity protection | reverse polarity protected |
| Output polarity | DC |
| Switching frequency | 0 ... 1000 Hz |
| Mission Time (TM) | 20 a |
| Operating current | 0 ... 200 mA , above 50В°C max. 150 mA |
| No-load supply current | ≤ 15 mA |
| Mass | 50 g |
| Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 9 mm x 9 mm x 1 mm |
| Reduction factor rCu | 0.3 |
| Inductive overvoltage protection | yes |
| Output type | 3-wire |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Output type | PNP |
| Switching function | Normally open (NO) |
| Ambient temperature | -25 ... 85 В°C (-13 ... 185 В°F) |
| Ripple | ≤ 10 % |
| Installation | quasi flush |
| Overload resistance | yes |
| UL approval | cULus Listed, General Purpose, Class 2 Power Source |
| Voltage drop | ≤ 2 V |
| Surge suppression | yes |
| Off-state current | ≤ 10 µA |
| Reduction factor rBrass | 0.45 |
| Reduction factor r304 | 0.7 |
| Connection type | cable |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Short-circuit protection | pulsing |
Comments
No comments yet