Pepperl+Fuchs NEN10-12GM50-E2
Inductive sensor

Pepperl+Fuchs NEN10-12GM50-E2
Series: Cylindrical type, Housing diameter: 12 mm, Housing material: brass, nickel-plated, Rated operating distance: 10 mm, Connection type: cable PUR , 2 m, Output type: 3-wire, Installation: non-flush, Type of voltage: DC
Item Number: NEN10-12GM50-E2
94.74
-
+
Total price: 94.74
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments
General specifications
Switching element functionPNP NO
Rated operating distance10 mm
Installationnon-flush
Output polarityDC
Assured operating distance0 ... 8.1 mm
Actuating elementmild steel, e. g. 1.0037, SR235JR (formerly St37-2)
30 mm x 30 mm x 1 mm
Reduction factor rAl 0.45
Reduction factor rCu 0.4
Reduction factor r304 0.75
Reduction factor rBrass 0.45
Nominal ratings
Installation conditions
Ain steel 1.0037 (St37): 10 mm
B16 mm
C30 mm
F42 mm
Operating voltage10 ... 30 V DC
Switching frequency0 ... 600 Hz
Hysteresis0.06 ... 1 mm
Reverse polarity protectionyes
Short-circuit protectionpulsing
Overload resistanceyes
Wire breakage protectionyes
Surge suppressionyes
Ripple10 %
Voltage dropless than or equal to 2 V
Repeat accuracy0.3 mm
Operating current0 ... 200 mA , above 70°C max. 150 mA
Off-state currentless than or equal to 10 mA
No-load supply currentless than or equal to 15 mA
Switching state indicatorLED, yellow
Functional safety related parameters
MTTFd1740 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Approvals and certificates
UL approvalcULus Listed, General Purpose
CCC approvalCCC approval / marking not required for products rated less than or equal to 36 V
Ambient conditions
Ambient temperature-25 ... 85 °C (-13 ... 185 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection typecable PUR , 2 m
Core cross-section0.34 mm2
Housing materialbrass, nickel-plated
Sensing facePBT
Housing diameter12 mm
Degree of protectionIP67
Mass100 g
Tightening torque, fastening screwsmax. 10 Nm

Comments

No comments yet

Write a comment