Pepperl+Fuchs NJ15-30GK-N-150-Y38977 Inductive sensor

Pepperl+Fuchs NJ15-30GK-N-150-Y38977
Item Number: NJ15-30GK-N-150-Y38977
  • Temperature range
    -25 ... 150 В°C (-13 ... 302 В°F)
417.20
Quantity
-
+
Total price: 417.20
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments

This product is not available!

Reduction factor rCu0.3

Reduction factor r3040.85
Switching functionNormally closed (NC)
Core cross-section0.38 mm2
Rated operating distance15 mm
MTTFd4540 a
Degree of protectionIP65
Switching frequency0 ... 100 Hz
Appropriate typeNJ15-30GK-N-150...
ATEX marking II 1D Ex ia IIIC T135В°C Da
The Ex-related marking can also be printed on the enclosed label.
Diagnostic Coverage (DC)0 %
Appropriate typeNJ15-30GK-N-150...
Connection typecable PTFE , 10 m
ATEX marking II 1G Ex ia IIC T6…T1 Ga
The Ex-related marking can also be printed on the enclosed label.
CE marking[*PD-Z02585A*]
Output type2-wire
CE marking[*PD-Z02585A*]
Effective internal inductancemax. 100 µH
A cable length of 10 m is considered.
Highest permissible ambient temperatureDetails of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the temperature class, and the effective internal reactance values can be found on the EU-type examination certificate. Note: Use the temperature table for category 1 !!! The 20 % reduction in accordance with EN 1127-1 has already been applied to the temperature table for category 1.
Mission Time (TM)20 a
Sensing facePPS
Effective internal inductancemax. 100 µH ; a cable length of 10 m is considered.
Effective internal capacitancemax. 140 nF ; a cable length of 10 m is considered.
Use in the hazardous areasee instruction manuals
Output typeNAMUR
Maximum permissible ambient temperatureDetails of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the temperature class, and the effective internal reactance values can be found on the EU-type examination certificate.
Assured operating distance0 ... 12.15 mm
ATEX marking II 1G Ex ia IIC T6…T1 Ga
The Ex-related marking can also be printed on the enclosed label.
Housing materialPPS
Installationnon-flush
StandardsEN 60079-0:2012+A11:2013, EN 60079-11:2012
Ignition protection ""Intrinsic safety""
Use is restricted to the following stated conditions
Ambient temperature-25 ... 150 В°C (-13 ... 302 В°F)
Effective internal capacitancemax. 140 µF
A cable length of 10 m is considered.
Nominal voltage8 V
StandardsEN 60079-0:2012+A11:2013, EN 60079-11:2012
Ignition protection ""Intrinsic safety""
Use is restricted to the following stated conditions
Effective internal inductancemax. 100 µH ; a cable length of 10 m is considered.
StandardsEN 60079-0:2012+A11:2013, EN 60079-11:2012
Ignition protection ""Intrinsic safety""
Use is restricted to the following stated conditions
CE marking[*PD-Z02585A*]
CSA approvalcCSAus Listed, General Purpose
Appropriate typeNJ15-30GK-N-150...
Reduction factor rAl0.4
Effective internal capacitancemax. 140 nF ; a cable length of 10 m is considered.

Comments

No comments yet

Write a comment