Pepperl+Fuchs NJ15-M1K-N
Inductive sensor
- Comfort series
- 15 mm non-flush
Item Number:
NJ15-M1K-N
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
CE marking | [*PD-Z02585A*] |
Ambient temperature | -25 ... 100 В°C (-13 ... 212 В°F) |
Actual operating distance | 13.5 ... 16.5 mm typ. |
Use in the hazardous area | see instruction manuals |
MTTFd | 2424 a |
Effective internal inductance | max. 100 µH A cable length of 10 m is considered. |
Reduction factor r304 | 0.8 |
Type of protection | intrinsic safety |
Rated operating distance | 15 mm |
Maximum permissible ambient temperature | Also observe the maximum permissible ambient temperature stated in the general technical data. Keep to the lower of the two values. |
Switching frequency | 0 ... 100 Hz |
Effective internal capacitance | max. 140 nF A cable length of 10 m is considered. |
Assured operating distance | 0 ... 12.15 mm |
Effective internal inductance | max. 100 µH A cable length of 10 m is considered. |
Switching function | Normally closed (NC) |
Sensing face | PBT |
Maximum permissible ambient temperature | Also observe the maximum permissible ambient temperature stated in the general technical data. Keep to the lower of the two values. at Ui = 16 V , Ii = 25 mA , Pi = 34 mW , T6 : 73 В°C (163.4 В°F) T5 : 88 В°C (190.4 В°F) T4 : 100 В°C (212 В°F) T3 : 100 В°C (212 В°F) T2 : 100 В°C (212 В°F) T1 : 100 В°C (212 В°F) at Ui = 16 V , Ii = 25 mA , Pi = 64 mW , T6 : 66 В°C (150.8 В°F) T5 : 81 В°C (177.8 В°F) T4 : 100 В°C (212 В°F) T3 : 100 В°C (212 В°F) T2 : 100 В°C (212 В°F) T1 : 100 В°C (212 В°F) at Ui = 16 V , Ii = 52 mA , Pi = 169 mW , T6 : 45 В°C (113 В°F) T5 : 60 В°C (140 В°F) T4 : 89 В°C (192.2 В°F) T3 : 89 В°C (192.2 В°F) T2 : 89 В°C (192.2 В°F) T1 : 89 В°C (192.2 В°F) at Ui = 16 V , Ii = 76 mA , Pi = 242 mW , T6 : 30 В°C (86 В°F) T5 : 45 В°C (113 В°F) T4 : 74 В°C (165.2 В°F) T3 : 74 В°C (165.2 В°F) T2 : 74 В°C (165.2 В°F) T1 : 74 В°C (165.2 В°F) |
Effective internal capacitance | max. 140 nF A cable length of 10 m is considered. |
Effective internal inductance | max. 100 µH A cable length of 10 m is considered. |
Diagnostic Coverage (DC) | 0 % |
Equipment protection level | Ga , Gb , Da , Mb |
Degree of protection | IP67 |
Output type | NAMUR |
Connection type | screw terminals |
Output type | 2-wire |
Maximum permissible ambient temperature | Also observe the maximum permissible ambient temperature stated in the general technical data. Keep to the lower of the two values. at Ui = 16 V , Ii = 25 mA , Pi = 34 mW : 100 В°C (212 В°F) at Ui = 16 V , Ii = 25 mA , Pi = 64 mW : 100 В°C (212 В°F) at Ui = 16 V , Ii = 52 mA , Pi = 169 mW : 89 В°C (192.2 В°F) at Ui = 16 V , Ii = 76 mA , Pi = 242 mW : 74 В°C (165.2 В°F) |
Core cross-section | up to 2.5 mm2 |
Installation | non-flush |
Housing material | PBT |
CE marking | [*PD-Z02585A*] |
Effective internal capacitance | max. 140 nF A cable length of 10 m is considered. |
Type of protection | intrinsic safety |
Effective internal inductance | max. 100 µH A cable length of 10 m is considered. |
Switching state indicator | LED, yellow |
Nominal voltage | 8.2 V (Ri approx. 1 kΩ) |
Maximum permissible ambient temperature | Also observe the maximum permissible ambient temperature stated in the general technical data. Keep to the lower of the two values. at Ui = 16 V , Ii = 25 mA , Pi = 34 mW : 100 В°C (212 В°F) at Ui = 16 V , Ii = 25 mA , Pi = 64 mW : 100 В°C (212 В°F) at Ui = 16 V , Ii = 52 mA , Pi = 169 mW : 89 В°C (192.2 В°F) at Ui = 16 V , Ii = 76 mA , Pi = 242 mW : 74 В°C (165.2 В°F) |
Reduction factor rCu | 0.4 |
Mission Time (TM) | 20 a |
Information for connection | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % |
CE marking | [*PD-Z02585A*] |
Type of protection | intrinsic safety |
Reduction factor rAl | 0.45 |
Effective internal capacitance | max. 140 µF A cable length of 10 m is considered. |
People also buy
Comments
No comments yet