Pepperl+Fuchs NJ15+U2+N
Inductive sensor
- Comfort series
- 15 mm flush
Item Number:
NJ15+U2+N
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| UL approval | cULus Listed, General Purpose |
| Effective internal capacitance | max. 140 nF ; a cable length of 10 m is considered. |
| Appropriate type | NJ 15+U.+N... |
| Reduction factor r304 | 0.85 |
| Information for connection | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % |
| ATEX marking | The Ex-related marking can also be printed on the enclosed label. |
| CSA approval | cCSAus Listed, General Purpose |
| Maximum permissible ambient temperature | Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the temperature class, and the effective internal reactance values can be found on the EU-type examination certificate. |
| CE marking | [*PD-Z02585A*] |
| Connection type | screw terminals |
| Effective internal inductance | max. 130 andmicro;H ; a cable length of 10 m is considered. |
| Switching function | Normally closed (NC) |
| Degree of protection | IP68 |
| Ambient temperature | -25 ... 100 В°C (-13 ... 212 В°F) |
| Standards | EN 60079-0:2012+A11:2013, EN 60079-11:2012 Ignition protection ""Intrinsic safety"" Use is restricted to the following stated conditions |
| Standards | EN 60079-0:2012+A11:2013, EN 60079-11:2012 Ignition protection ""Intrinsic safety"" Use is restricted to the following stated conditions |
| Core cross-section | up to 2.5 mm2 |
| Installation | flush |
| CE marking | [*PD-Z02585A*] |
| Housing material | PBT |
| Effective internal capacitance | max. 140 andmicro;F A cable length of 10 m is considered. |
| Sensing face | PBT |
| ATEX marking | The Ex-related marking can also be printed on the enclosed label. |
| Appropriate type | NJ 15+U.+N... |
| Reduction factor rCu | 0.3 |
| Output type | NAMUR |
| Reduction factor rAl | 0.4 |
| Assured operating distance | 0 ... 12.15 mm |
| Effective internal inductance | max. 130 andmicro;H A cable length of 10 m is considered. |
| Rated operating distance | 15 mm |
| Switching frequency | 0 ... 120 Hz |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Use in the hazardous area | see instruction manuals |
| Nominal voltage | 8 V |
| Output type | 2-wire |
Comments
No comments yet