Pepperl+Fuchs NJ2-D-E02-1.250-V1
Inductive sensor
- 4-wire DC
- Weld Immune
- Sensing range 2 mm
- 3000 psi rating
- Overview
- Comments
Note | X = 1.250 in (31.8 mm) |
Operating voltage | 10 ... 30 V DC |
Output type | PNP/NPN |
Standards | EN 60947-5-2 |
Mag. Field strength, DC fields | 100 mT |
Reduction factor rAl | 0.4 |
Reduction factor r304 | 0.85 |
Material | Housing: zinc Probe: aluminum |
Reverse polarity protection | yes |
LED yellow | Output status |
Voltage drop | 2 V DC |
Hysteresis | 10 ... 20 typ. 15 % |
Connection type | Connector M12 x 1 , 4-pin |
Off-state current | 100 andmicro;A |
Degree of protection | IP67 |
No-load supply current | 35 mA |
Operating pressure dynamically | 3000 psi |
CSA approval | cCSAus Listed, General Purpose |
UL approval | cULus Listed, General Purpose |
Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
Output polarity | DC |
LED green | Power on |
Mag. Field strength, AC fields | 250 mT |
Installation | flush |
Rated operating distance | 2 mm |
Switching function | Normally open (NO) |
Short-circuit protection | yes |
Assured operating distance | 0 ... 1.62 mm |
Switching frequency | 30 Hz |
Operating current | 200 mA |
People also buy
Comments
No comments yet