Pepperl+Fuchs NJ2-N-H42 Inductive sensor
Item Number: NJ2-N-H42
- Comfort series
- 2 mm flush
- Compression proof up to 350 bar, dynamic on active surface
- Overview
- Datasheet
- Alternative numbers
- Comments
| Mass | 167 g |
| Reduction factor rCu | 0 |
| Nominal voltage | 8 V |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Sensing face | Ceramic |
| Reduction factor r304 | 0.55 |
| Switching frequency | 0 ... 400 Hz |
| Ambient temperature | -25 ... 100 В°C (-13 ... 212 В°F) |
| Rated operating distance | 1.5 mm |
| Degree of protection | IP50 |
| Output type | NAMUR |
| Installation | flush |
| CSA approval | cCSAus Listed, General Purpose |
| Reduction factor rAl | 0 |
| Hysteresis | typ. 5 % |
| Assured operating distance | 0 ... 1.22 mm |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| Output type | 2-wire |
| Connection type | connector, ZH 630 603 00 Socket, ZH 632 603 00 |
| UL approval | cULus Listed, General Purpose |
| Switching function | Normally closed (NC) |
Comments
No comments yet