Pepperl+Fuchs NJ2-PD-E02-2.062-V95 Inductive sensor
Item Number: NJ2-PD-E02-2.062-V95
- 4-wire DC
- Weld Immune
- Sensing range 2 mm
- 3000 psi rating
- Overview
- Datasheet
- Alternative numbers
- Comments
| Off-state current | ≤ 100 µA |
| Connection type | Connector 7/8""-16 UN , 5-pin |
| LED green | Power on |
| Output polarity | DC |
| Output type | PNP/NPN |
| Reduction factor rAl | 0.4 |
| Mag. Field strength, AC fields | 250 mT |
| Degree of protection | IP67 |
| Material | Housing: zinc Probe: aluminum |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| No-load supply current | ≤ 35 mA |
| Operating current | ≤ 200 mA |
| CSA approval | cCSAus Listed, General Purpose |
| Standards | EN 60947-5-2 |
| Operating voltage | 10 ... 30 V DC |
| Switching function | Normally open (NO) |
| Short-circuit protection | yes |
| Mag. Field strength, DC fields | 100 mT |
| Reduction factor r304 | 0.85 |
| Reverse polarity protection | yes |
| Operating pressure dynamically | 3000 psi |
| Switching frequency | 30 Hz |
| Voltage drop | ≤ 2 V DC |
| Assured operating distance | 0 ... 1.62 mm |
| UL approval | cULus Listed, General Purpose |
| Hysteresis | 10 ... 20 typ. 15 % |
| Rated operating distance | 2 mm |
| Installation | flush |
| Note | X = 2.062 in (52.4 mm) |
| LED yellow | Output status |
Comments
No comments yet