Pepperl+Fuchs NJ2-V3-N-Y220141 Inductive sensor

Pepperl+Fuchs NJ2-V3-N-Y220141
Item Number: NJ2-V3-N-Y220141
  • Comfort series
191.80
Quantity
-
+
Total price: 191.80
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
ATEX marking II 1G Ex ia IIC T6…T1 Ga
The Ex-related marking can also be printed on the enclosed label.
Degree of protectionIP67
Rated operating distance2 mm
Ambient temperature-25 ... 100 В°C (-13 ... 212 В°F)
Effective internal capacitancemax. 40 nF ; a cable length of 10 m is considered.
Use in the hazardous areasee instruction manuals
Sensing facePBT
CSA approvalcCSAus Listed, General Purpose
Effective internal capacitancemax. 40 nF ; a cable length of 10 m is considered.
CE marking[*PD-Z02585A*]
CE marking[*PD-Z02585A*]
ATEX marking II 1D Ex ia IIIC T135В°C Da
The Ex-related marking can also be printed on the enclosed label.
Ambient temperatureDetails of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the temperature class, and the effective internal reactance values can be found on the EC-type examination certificate. Note: Use the temperature table for category 1 !!! The 20 % reduction in accordance with EN 1127-1 has already been applied to the temperature table for category 1.
Core cross-section0.14 mm2
StandardsEN 60079-0:2012+A11:2013, EN 60079-11:2012
Ignition protection ""Intrinsic safety""
Use is restricted to the following stated conditions
Switching frequency0 ... 1000 Hz
Reduction factor r304 0.7
Effective internal inductancemax. 50 µH ; a cable length of 10 m is considered.
Hysteresis0.01 ... 0.1 mm
Effective internal inductancemax. 50 µH ; a cable length of 10 m is considered.
Appropriate typeNJ 2-V3-N ...
Maximum permissible ambient temperatureDetails of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the temperature class, and the effective internal reactance values can be found on the EC-type examination certificate.
StandardsEN 60079-0:2012+A11:2013 EN 60079-11:2012
Ignition protection ""Intrinsic safety"" Use is restricted to the following stated conditions
Switching functionNormally closed (NC)
Reduction factor rCu 0.2
Connection typecable PVC , 170 mm
Output typeNAMUR
Reduction factor rAl 0.25
CE marking[*PD-Z02585A*]
Effective internal inductancemax. 50 µH ; a cable length of 10 m is considered.
Effective internal capacitancemax. 40 nF ; a cable length of 10 m is considered.
ATEX marking II 1G Ex ia IIC T6…T1 Ga
The Ex-related marking can also be printed on the enclosed label.
Appropriate typeNJ 2-V3-N ...
Appropriate typeNJ 2-V3-N ...
Assured operating distance0 ... 1.62 mm
Housing materialPBT
Output type2-wire
Nominal voltage8 V
StandardsEN 60079-0:2012+A11:2013 EN 60079-11:2012
Ignition protection ""Intrinsic safety""
Use is restricted to the following stated conditions
Installationflush

Comments

No comments yet

Write a comment